GOOOOOOO GONE!!! IT TOTALLY WORKS and will NOT mess up your board- its quick and easy. i took off the same thing on one of my boards- the guy I got it from wrote his last name on the bottom with one of those huge 1/4 inch size sharpies....
You could also use some cleaner called "Spray 9" -you can buy it a Lowes- but this stuff is super strong and is pretty much like a solvent...
Acetone will totally mess up your fiberglass- that is a solvent and will dissolve your glass and make it dull.
Sandpaper is NG (sorry wally) and will turn into a big project (unless its just a little mark) - trying to get the boards finish back. Plus your totally sanding your board down- thus making the glass thinner...
FYI, Nailpolish remover aka Acetone.
If Goo Gone works go with that. As pointed out, much better for your board than sanding.
Originally Posted by walkingonh2o