LOGIN | REGISTER

Page 1 of 2 12 LastLast
Results 1 to 10 of 30

Thread: Wetsuit Quiver

Hybrid View

  1. #1

    Wetsuit Quiver

    Wanted to hear everyone's wetsuit quiver...list your surf state, thickness and quantity of each thickness. Couldn't find a thread directly related to this topic either.

    Me:
    New York
    (1) 6/5/4 hooded
    (1) 4/3
    (1) 3/2
    (2) spring suits

    Two winter suits would be optimal for dry second sessions. Contemplating on getting a 5/4/3 to complete my arsenal of rubber.

  2. #2
    NY/OCMD

    -Xcel Hooded 5/4/3 (x-zip infiniti)
    -Xcel 4/3
    -O'neill 3/2 (with a ripped zipper...suggestions?)
    -xcel 7mm drylock boots and Hyperflex 5mm boots
    -xcel 5mm gloves

  3. #3
    Southern N.E.

    Xcel 6/5 mil
    West 6/5 mil
    Xcel 5/4
    West 4
    7 mil Solution boots and Xcel gloves for winter
    thinner and old ones with holes for fall/spring
    shorty and spring suits with more holes than swiss cheese for summer

  4. #4
    Long Island

    Xcel Drylock 5/4
    Oneill 4/3
    Oneill 3/2
    7mm drylock boots
    5mm drylock lobster gloves

  5. Mass/NH

    Billabong 6/5/4 hooded
    XCEL 5mm gloves
    XCEL 7mm boots
    Quiksilver 3/2

  6. #6
    ny:

    1mm axxe top
    patagonia r3
    patagonia r4 hooded
    5mm drylock lobster claws
    7mm drylock booties


    wish i had the r2 instead of the r3 which i used to use year round with an added longsleeve hood underneath.

  7. #7
    Quote Originally Posted by fisurf View Post
    Long Island

    5mm drylock lobster gloves
    love these gloves but do you have any tips for putting them on? it's lame, but i can't seem to get the cuff straight when i put on the second glove with my other gloved hand. it's always rolled under and not water tight. anyone?

  8. Quote Originally Posted by travy View Post
    love these gloves but do you have any tips for putting them on? it's lame, but i can't seem to get the cuff straight when i put on the second glove with my other gloved hand. it's always rolled under and not water tight. anyone?
    To put my gloves on I do this:

    Before I put my arms through my wetsuit sleeves, I put both of my gloves on. Then you stick your gloved hand in a grocery bag and slide your hand down the sleeve. Then do the same with the other arm. This way you dont have to deal with rolling your sleeves and you get a nice fit with the sleeve over your glove.

  9. #9

    putting on drylock gloves

    Quote Originally Posted by travy View Post
    love these gloves but do you have any tips for putting them on? it's lame, but i can't seem to get the cuff straight when i put on the second glove with my other gloved hand. it's always rolled under and not water tight. anyone?
    if your problem is getting the glove itself on, the best thing is actually to follow the instructions on the box. Roll up the drylock cuff of the glove about an inch or so, so that you are slipping your hand in through neoprene, not the rubber cuff. then just flip it back down when you have your hand fully in the glove. make sure you roll up both cuffs before you start putting the first one on, so you wont have to do it with a gloved hand. flipping the cuff back down can be a little tricky for the second glove, if you just keep on swiping at it with your gloved hand, or try using your teeth, you will get it.

  10. #10
    Join Date
    Aug 2010
    Location
    South Jersey
    Posts
    405
    Quote Originally Posted by travy View Post
    love these gloves but do you have any tips for putting them on? it's lame, but i can't seem to get the cuff straight when i put on the second glove with my other gloved hand. it's always rolled under and not water tight. anyone?
    yea i'm with you. they are the warmest gloves I've ever had but it takes me a good 15 minutes to get my second glove on. And by the time I'm done I'm f*cking exhausted lol.
    tips would be great....