LOGIN | REGISTER

Results 1 to 10 of 10

Thread: Firewire Repair

Hybrid View

  1. #1
    Join Date
    Oct 2007
    Location
    Davy Jones' Locker
    Posts
    1,385
    Images
    64

    Firewire Repair

    Does anyone know where they do Firewire repair in NJ?

    I checked the Firewire website to only find authorized repair shops in other states. I got a puncture that I will repair myself I just need it pressurized. I don't know of any shop around here that can pressurized it. (monmouth county)


    Thanks!

  2. #2
    Join Date
    May 2008
    Location
    Long Branch
    Posts
    367
    Images
    3
    Are you sure Firewires require being pressurized? I have done many of my own repairs and never had an issue. From what i hear, the valve on the board is only there to make sure there is no pressure buildup in the board when there's a change in temperature or when flying on a plane

  3. #3
    Join Date
    Oct 2007
    Location
    Davy Jones' Locker
    Posts
    1,385
    Images
    64
    Quote Originally Posted by darippah View Post
    Are you sure Firewires require being pressurized? I have done many of my own repairs and never had an issue. From what i hear, the valve on the board is only there to make sure there is no pressure buildup in the board when there's a change in temperature or when flying on a plane
    No, i am not 100% sure. I have heard mixed reviews on this. But, I was told by a repair shop that they need re-pressure if the puncture was all the way through. I might just have to contact Firewire again and see what they say.

    Thanks

  4. #4

    Repair

    I had a logger ride through one of my firewires rails during Bill a few years ago and I took my board to Farias in Ship Bottom, they did a good job...give them a call

  5. #5
    Join Date
    Jun 2010
    Location
    Carolina Beach
    Posts
    845
    Images
    1
    Take it to Jamie down in OCNJ. He works out of the Heritage shop down there I think but does the best ding repairs I've ever seen. I took my buckled Firewire to him and it came back looking brand new. Here's a link to his facebook page, you can probably get in touch with him through there, otherwise call the OC Heritage shop and see when he'll be there

    http://www.facebook.com/home.php#!/p...18467604885962

  6. #6
    Join Date
    Nov 2009
    Location
    in the grace of the most holy FSM
    Posts
    3,067
    Quote Originally Posted by RobG View Post
    Take it to Jamie down in OCNJ. He works out of the Heritage shop down there I think but does the best ding repairs I've ever seen. I took my buckled Firewire to him and it came back looking brand new. Here's a link to his facebook page, you can probably get in touch with him through there, otherwise call the OC Heritage shop and see when he'll be there

    http://www.facebook.com/home.php#!/p...18467604885962
    i am admittedly biased, but jamie is your best option. he's the best ding guy in southern nj bar none, possibly the best in the state. i saw rob's board when it was at jamie's shack, before & after, & it came out fantastic! (glad you're stoked on it, btw, rob!) jamie's got the full vaccum pump all set up, so while he may not be "officially authorized," he is certianly more than capable.