Bought this old board recently and would like to know the history behind it...its a south shore single fin<br /><br />AND...its a fish tail so I'm wondering what steps i should be taking to fix it. Few dings here and there is the easy repair, but the tail is in bad shape...any thoughts?
<br /><br /><br /><br />Thanks
Last edited by ItalianStallion; Feb 16, 2012 at 05:43 PM.
After grinding, Use 3M 233+ tape to make a resin dam on each tip. Polyester resin will melt other tapes. Overfill with Qcell/resin. Let cure, reshape tips, lam tips with 4 oz. cloth, fair edges with sandpaper, hotcoat, sand, spray with clearcoat - in a nutshell.
~Brian www.greenlightsurfsupply.com Shape Your Surfing Experience
surfing cowboys.com is a place to start for the history of it. i got a single fin diamond tail for 33 bucks at a hicktown farm auction. theyre mid 70s-ish. id say greenlights advice is about all ya need to fix it .cool lookin boards but weird to ride around here unless you find something like a point to take it out in.