LOGIN | REGISTER

Results 1 to 4 of 4
  1. #1

    webber fatburner

    I have a webber fatburner epoxy fish that I bought a few years back. Yeah, Yeah I know its a POS pop-out, and I appologize to all local shapers for buying it.

    Anyway, I must say I have come to really like this board. It is a 6.6, and I ride it as a thruster.

    My question is, the board has pretty serious single to double concave. I have never ridden another board like it.

    Has anyone else had any experience with a design like this? I am looking for a new handshaped shortboard soon and was curious if any performance boards had simular designs or if this was a webber only design?

    Thanks

  2. #2
    Join Date
    Aug 2011
    Location
    Manasquan
    Posts
    303
    Images
    6
    Almost every HPSB will have a single to double, some have vee out the tail.. unless it is a small wave grovler which usually have a straight single concave to push through more mush. Webber's do have a serious deep double concave running through them though. i actually prefer a less deep concave, for east coast waves too deep of a concave in my opinion slow the board to much creating to much drag. but not always the case.. hope this helps...

  3. #3
    Join Date
    Aug 2009
    Location
    Monmouth Beach, NJ
    Posts
    2,311
    There's a lot of variables that go into what kind of bottom a board will have. Some of the things to consider closely are rocker, rail edges, and wave type. Put a straight edge across the bottom of the board and slide it fore and aft to see exactly what's going on... where the concaves start, their deepest point, are the doubles in the single ("single to double concave") or does the single fade and doubles take over ("triple concave"), whether there's any vee along the length of the concave... Really pay attention to the details.

    Here are some basic "rules of thumb" for me... I prefer single concaves for smaller waves, and combinations of concaves for bigger/better waves. I also like deeper concaves for boards for bigger surf with more rocker, and more subtle concaves for smaller or weaker surf and flatter rockers. The exception to these rules is super wide boards, in which deep double concaves work well due to the fact that you're essentially riding one half of the board at a time. The Sweet Potato is a good example, and that's what I think the Fatburner is trying to achieve as well, in addition to opening up the performance envelope a bit to handle better surf, particularly for a bigger rider.
    Last edited by LBCrew; Mar 21, 2012 at 11:26 AM.

  4. #4
    Hey guys- thanks for the info. Even though I have surfed for a long time, I am just starting to understand bottom shape influence. Your observations helped me grasp it even further. Thanks for your input.