LOGIN | REGISTER

Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: how to?

  1. #11
    Join Date
    Aug 2010
    Location
    BELMAR, NJ
    Posts
    1,494
    Images
    1
    GOOOOOOO GONE!!! IT TOTALLY WORKS and will NOT mess up your board- its quick and easy. i took off the same thing on one of my boards- the guy I got it from wrote his last name on the bottom with one of those huge 1/4 inch size sharpies....

    You could also use some cleaner called "Spray 9" -you can buy it a Lowes- but this stuff is super strong and is pretty much like a solvent...

    Acetone will totally mess up your fiberglass- that is a solvent and will dissolve your glass and make it dull.

    Sandpaper is NG (sorry wally) and will turn into a big project (unless its just a little mark) - trying to get the boards finish back. Plus your totally sanding your board down- thus making the glass thinner...
    Last edited by walkingonh2o; Apr 3, 2012 at 01:24 PM.

  2. #12

  3. #13
    Join Date
    Mar 2010
    Location
    Virginia Beach
    Posts
    147
    Images
    4
    FYI, Nailpolish remover aka Acetone.

  4. #14
    Quote Originally Posted by walkingonh2o View Post
    GOOOOOOO GONE!!! IT TOTALLY WORKS and will NOT mess up your board- its quick and easy. i took off the same thing on one of my boards- the guy I got it from wrote his last name on the bottom with one of those huge 1/4 inch size sharpies....

    You could also use some cleaner called "Spray 9" -you can buy it a Lowes- but this stuff is super strong and is pretty much like a solvent...

    Acetone will totally mess up your fiberglass- that is a solvent and will dissolve your glass and make it dull.

    Sandpaper is NG (sorry wally) and will turn into a big project (unless its just a little mark) - trying to get the boards finish back. Plus your totally sanding your board down- thus making the glass thinner...
    If Goo Gone works go with that. As pointed out, much better for your board than sanding.