New 9'7x23"x3 1/4" noserider stringerless nose, resin swirl
so i just got this 10'2B blank 24" stringer less nose, with 3/4" balsa wedge tapering to 0" at the 24" mark(see below for pics) did a teal/black resin swirl, teal deck, white pinlines, it will be glossed and polished but i thought some people may be interested in a pre finished pic and video, i did a time lapse video of me glassing it (the video fell half way through but got it back up) the reason behind the stringer less 24" in the nose will be to flatten out rocker when nose riding. probably finish it up this week but thought you guys might like.
if you dont mind me asking, if its your laminating coat how do you squeegee the extra resin off without messing up the swirl effect, ive always heard that to much resin on your laminating coat isnt good and you can lose strength, i dont know, just asking the pros, also, what size (oz.) fiberglass would you use on a board like this, top and bottom, i would like to make my own longboard one day, i guess it doesnt hurt to ask questions...btw beautiful board...good job
Last edited by fl.surfdog; Jul 6, 2012 at 12:38 AM.