LOGIN | REGISTER

Results 1 to 7 of 7
  1. #1

    Tell me about glueing a kick pad back on

    Its a normal foam kick pad, and an epoxy board with EPS foam. I remember reading here that superglue will melt EPS, but what if its not exposed? Anyone know anything strong enough to hold a piece of this pad back on without melting my board? Its a green room board, and glass if that makes a difference.

  2. #2
    Join Date
    Aug 2011
    Location
    Manasquan
    Posts
    303
    Images
    6
    3m super 80 spray adhesive

  3. #3
    Perfect. Thanks.

  4. #4
    Join Date
    Jun 2010
    Location
    Carolina Beach
    Posts
    852
    Images
    1
    I have used Gorilla Glue for when the pad starts to peel up, has worked fine for me.

  5. #5
    Join Date
    Aug 2009
    Location
    Monmouth Beach, NJ
    Posts
    2,544
    I've used Plumber's Goop to re-attach the edges of pads that start to peel off, but I wouldn't use it on the whole pad. It's too expensive. But blows Super Glue away.
    Last edited by LBCrew; Jul 15, 2012 at 01:55 AM.

  6. #6
    Join Date
    Aug 2011
    Location
    Manasquan, NJ
    Posts
    66
    Any marine glue will work fine.

  7. #7
    I ended up going with the 3M 80. Worked like a charm. It was still a little tacky after 12 hours of setting, and held like a champ in yesterdays swell. Thanks again.