Don't do it, you'll regret it in the long run, plus it'll delay your repair job while you wait for it to dry out again. Hint, hint; duct(k) tape don't keep water out. If you aint got no qcell, cut up a bunch of fiberglass real fine so it's a bunch of little fibers, then put some resin in whatever container you use, add your catalyst and then your fiberglass fibers, mix her up, you want her to be like a slurry so cut plenty o fiberglass. Pour it into the hole, crack whatever. Heh heh. Don't make a g-damn mess! Sand her in like a hour or two, hit it with a sheet a glass an some mor resin, BLAMMO, water tight and outta sight.
\nYou asked bout quipment failures, well I had a week full o'em. Man, I tell you what; last Friday I take off from work go for dawn patrol, beautiful. Took ma log, was bigger en I expected, no prob, had a blast. Well, I hang in a little too long, get shacked for bout half a sec and then ate, dive through the wave and the ol log goes ta other way. Was pretty damn close to the shore which is a we bit rocky so SOP, 'cept I picked up a fackin ding on the rail this time. Totally worth it. Whatever, peddled home, grabbed the Coil; paddled back out, had a blast. Surfed 3 different spots that day with some friends from outta town.
\nWell, come Sunday I'm out on the wife's 7'2" that I shaped and glassed, some poor, teenage girl gets carried by the rip 15' in front of me while I'm paddling back into the line up as a set is comin through. She screws the pooch on her duck dive, gets caught in the wash and I see her tail go right up in the air. I thinks ol' boy, she's comin' right for us. I turtle, get ma hand smashed and a fat fin sized gash in ma rail on that board. Need to fix her 2morrow.
\nSo, I fix the ding on the rail of my longboard Tuesday night (magic 3 days of dry time) after my evening sesh and the lil'ins have gone off to the land o' Nod. Take her out Wed. and it's minor boomin again. Bit walled up and closed put, but not hairy. It was miniscule the day before and the forecast was callin' for 2-3', so it's a h377 of a nice surprise.Well sh!1, I ain't gonna look a gift horse in the mouth, so I go get some, have some fun. Drop into one I knew better than to, an I get ate. Well padner, I end up gettin' a couple of fins to the arse. Stang somethin' fierce, but no worries. Grab the next one in the set an I feel a bit of a flutter.grab another couple, still flutterin'. Get out of the water an the glass round my lft fin is all cracked and it's been depressed about .5". Loose as a goose an drippin. SumOaBeeyatch, just fixed her! My leg hasn't had bruises on it like this since I used to pay people to kick me. Gotta cut that fin off then glassit back on tomorrow too.
\nWelp, tonight as I'm ridden home from my sesh, the rear tire on my ol' bike up an falls out of the grooves right as I'm crossin the 101 on the rail road tracks. Took one o them big, ol metals pedals with the spikes right to the achilles tendon. Hurts like a mutherfcker and bled all over the place. Least I didn't eat sh|1 or ding another board, saved me from having' to fix another ding and gettin' run over.
\nBad luck week. Least I got a deep quiver. Nothin some resin, fiberglass, neosporin, a couple o vikes left from my knee surgery and a rum n coke don't fix. Good luck on that ding repair, c u out there 2morrow mornin (metaphorically speakin'). Should b good.
\n"I'm happy to be here. I'm 70 years old, I'm happy to be anywhere."
\n~ Chuck Berry, N'Awlins Jazz N Heritage Fest, 1996 Then he did the duck walk
\nThat was effin hilarious... and a great attitude, too.
Results 1 to 8 of 8
Sep 22, 2012, 08:11 PM
'; pd = '
Sorry to hear bout your bad luck zaGaffer and hope ya heal up fine, i have to say, that was some entertaining reading
'; pd = '
solarez. that stuff is a permanent fix with fiberglass mixed in and it cures in 2 minutes in the sun, even on cloudy days. easily sanded down if need be.
'; pd = '
Sep 23, 2012, 03:27 AM
Thanks all, got that fin back on my long board today. Hardest repair I've ever done by far. The glass underneath was all jacked up and so was the foam. Had to cut her off by grinder. Just poured some white pigmented resin into the hole to fill it in, let it dry, hit it with the grit and then slapped the ole fin on after a lil finessin. Still need to finish sanding it down, prolly won't even gloss coat it. Poor board's startin to look like me. Scars all over, missing the tip of a digit, patched up and gettin a lumpy nose that's no longer quite as straight as when it and I left the factory.
'; pd = '
Sep 24, 2012, 04:29 AM
\nStill needs a gloss coat and maybe a little more sandin first, but I wanted to get her wet and make sure she rode true first, just in case i had to cut it off and start over. Except for the 3 massive bruises runnin down my thigh to remind me, I'm still pretty shocked I almost broke it off and drove it through the deck. These fins are on solid. They're made from about 20-30 layers of fiberglass, then glassed directly onto the deck with 50-60 strands of fiberglass rope on each side, and then 3 layers of glass; again on each side, 1 about 2" wide, 1 about 4" and then finally one the a wee bit larger than the fin itself. I've hit 'em hard enough to know that they can take a beating. I've ripped out a few FCS and Futures boxes, but this is the first glass on I've ever busted. Whoo boy, once is enuff.
'; // next/previous post info pn = "140466,140311"; pn = ",140290"; pn = "140290,140348"; pn = "140311,140373"; pn = "140348,140326"; pn = "140373,140355"; pn = "140326,140411"; pn = "140355,140466"; pn = "140411,140290"; // cached usernames pu = guestphrase; pu = "arby"; pu = "zaGaffer"; pu = "fl.surfdog"; pu = "MFitz73"; pu = "cresto4"; // -->
Sep 22, 2012, 01:19 AM #1Member
- Join Date
- Jul 2012
what equipment failures have you had the night before waves?
trying to fix a huge chunk/ding out of my board tail the night before a decent swell arrives. only at qcell (i have no foam) stage. might have to skip to duct tape.
Last edited by arby; Sep 22, 2012 at 01:21 AM.