does anyone else just use wax anymore, even on standard hpsbs? i feel like i might be the only one...not a single board in my quiver has a pad on it. sure i've experimented w/ them here & there, but i inevitably always go back to simply wax, either by selling the board or ripping the pad off. i just don't see the benefits...
Results 1 to 10 of 24
Thread: no pads/traction-just wax
Mar 18, 2013, 02:33 AM #1
no pads/traction-just wax
if you dont see the benefits in having a track pad with a tail block on your surfboard, you may not be surfing hard enough..tail blocks are the only reason why i need a tack pad on my short board..for everything else there's wax.
Mar 18, 2013, 03:41 AM #3
I've got both.
It really depends on what the last guy did. Myself, I'm too cheap to drop 40$ bones on someplace to rest my piggies. I like em and I dislike em, all depends on the board. Coil's 6'8" thumb step up, dude I bought it off of was 5'10" if he was an inch, maybe a bill-70#. Bought for a mentawis trip, rode it a couple of times, too much board for him; perfect for me. Dude put a really nice pad all the way back to the leash plug. I use the first 6" of that thing most of the time, it's so rare I need to slam my foot to the tail to the last 2" of that board, It's skinnier n ma foot. First time I rode it, i was like, this is all wrong, i got ta yank this off. I like the pad though, it's grown on me. when it's pumpin, it's nice to get a firm foot on there, wish ol boy had had more sense than a left handed screw driver when he was stickin her on. Don't wanna rip it off. Have to buy a nude one. Good enough for the gubbermint as my pop says.
I got a 6'1" DD knock off for mush days. Most days that is, course the definition of mush varies by locale. Had this beastie for 3 odd months and have really done a number on her. Epoxy and a 4x4 deck and that stringer in the rail is startin to look like I should flip the board over and use it as a single fin. Pound, pound, pound with that back foot and that board cranks like skinny gal from Riverside. I tried usin some TC aqua lines on her n she was too squirrely. First board Ive ever ridden and thought, "This board's ride and control could be improved by a deckpad or stomppad or pillow thingy for the board so you know where to put proper foot placement of kajigger." Whatever's you call em.
I got a 6'4" that's brittle like grandma's jar o candy. Board I learned on. 80's thruster. Never felt it needed one. Still rides, no bull, they don't make em like they used too. that's a good thing. Same goes for a 90's style 6'6" made much more recently. Some boards I've liked em on some I haven't, it's just Circumstance. I generally like em though, but they're not a requirement.
Mar 18, 2013, 04:54 AM #4Senior Member
- Join Date
- Aug 2012
I don't use traction pads or leashes and I better not catch any body boarders at my lineup.
Just kidding. When I first saw the post title I thought for sure it was gona be someone acting high and mighty because he didn't use a traction pad Glad to say it wasn't the case.
I use a traction pad on my boards, but not on my longboard and I've only seen one person ever with a pad on their longboard. But I don't think you were talking about longboards.
Mar 18, 2013, 04:56 AM #5Junior Member
- Join Date
- Jan 2013
Tailblock on a pad is pretty crucial for me when youre spinning (reverses,air reverses) even just hits off the lip but im not going hate on your call of just wax its just preference and style of surfing
Mar 18, 2013, 11:49 AM #6
I only put pads on my hpsbs and grovelers. Wax only on my fish, log, and big wave boards. I feel like unless I'm pushing my tail around... using a lot of lateral force... I don't need it. For me, fish and logs are about carving and flow, and gun's are about driving off the rail.
I personally like tail pads/tractions pads. Although I totally agree that they are not necessary. It is personal preference, but I like the way they feel under my foot. Especially when I have thick booties on, I can feel the board more and helps me get a better idea where my feet are exactly without having to waste time looking while on a wave. Also, for whatever reason, I feel like adding a tail pad adds extra float to the board. I know it doesn't really, or if it does its so minor it doesn't really have an effect.
I removed the pad off one of my favorite boards to do some ding repair and rode it again before I put a new pad on. I actually really liked it and had a couple good sessions. But then I found myself at the surf shop this weekend and bought a new one. I immediately put it on and used it the next day.
I say go for the tail pads... They make you look cool
Mar 18, 2013, 01:50 PM #8
Maybe I'll line up like a dozen of them on my log. Can't think of a better use of $400.
Last edited by leethestud; Mar 18, 2013 at 01:53 PM.
Mar 18, 2013, 02:13 PM #9
I've never had one, always have gone with just wax, my 1st board ever was 6'4" BAT and didn't have one but that was over 15 years ago, my shortest board now is a 6'10" WRV FunFish and i've never put anything but wax on it, but I have been thinking about getting one for my new board, which is a 6'4" Coil Flashback Fish and thought it may be appropriate for this particular board but haven't 100% decided if I want to have one or not. It's got the new "kick" technology so the extra grip from the textured surface may make it so you don't need one at all, but it seems most people have one so IDK.
I put traction on kook's windshields!! Locals only!!!