Results 11 to 20 of 33
Thread: What to do?
Mar 19, 2013, 02:29 PM #11
Mar 21, 2013, 04:02 PM #12
Thanks for all the advice guys! Ya you would think the extra layer of glass would add some weight but it's actually relatively light (must be the epoxy).
So after asking for advice I got impatient and ended up going to the hardware store, buying some polyurethane, and using it for the repair. Might have been a stupid move but we'll see how it works out. I removed the delaminated area with an exacto, sanded it up, cleaned the surface with paint thinner, and used a foam brush to apply a thin layer and push it into all the cracks. I'll probably be sanding lightly and applying a second coat tonight, and maybe another the following day if necessary. This might end up being a lesson in what not to do, but it only cost $15 so here goes nothing...attached some pics below!
Mar 21, 2013, 05:00 PM #13
- Join Date
- Jan 2009
- milton delaware
Did you reglass it with some fiberglass?
or did you cut out the deliminated glass with the knife and just replace it with brushed on resin?
Mar 21, 2013, 05:04 PM #14
Dude... did you use any cloth?
Mar 21, 2013, 05:34 PM #15
Go with the suggestion of getting another one from CL.
Then, give your old stick to a local bar as long as they promise to hang it in on a wall or ceiling in full view. Then you can go have a beer with the old gal whenever you miss her.
Mar 21, 2013, 06:09 PM #16Senior Member
- Join Date
- Oct 2012
- Impacting the Coast for Jesus
Do not trash it, donate it to Son Followers Ministry.
Impacting the coast for Jesus
Mar 21, 2013, 07:06 PM #18
Mar 21, 2013, 07:21 PM #20