LOGIN | REGISTER

Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Hybrid View

  1. #1
    Join Date
    Jun 2009
    Location
    Ortley beach NJ
    Posts
    370
    Images
    45

    Future Quad setup help

    hey guys i just picked up a new sled ( from greenlight, you guys should check them out!) and i need help with the fins. It is a quad setup with futures. but i dont know what fins i should be looking at. the board is 5'10 by 19 1/4 by 2 1/4 i am 5'8 125. also if anyone has any fins they wanna sell let me know.
    IMG_8997.jpg

  2. #2
    Join Date
    Aug 2011
    Location
    Wilmington
    Posts
    2,340
    I have a Super that's pretty much that exact design except a little longer, but it has FCS. I ride it with pc-5 in the front and gx-q in the trailers. My buddy got a set of the Dane Reynolds quads for his Fark and they seem to work great. Maybe go that direction? Not a real similar comparison in board design but they seemed to make it more lively and fast. They're bamboo laminate so they have some good flex/snap incorporated in them too.

  3. #3
    Join Date
    Aug 2011
    Location
    Wilmington
    Posts
    2,340
    I also meant to say something else about the board design: The diamond tail with deep channels tracks really straight, but it's fast. I tried mine with the Simon Anderson pc-5, which have a lot of drive and not so much release, and it was just too hard to turn quickly on anything under chest high. I only use them in that board if it's meaty. Go for something that's going to give you some pivot.

  4. #4
    I use futures and ride quads almost exclusively. I've had great success with fam fronts and the 375 quad rears (this was for a McKee set-up). I'm partial though to blackstix and like the vector foil. Given your weight I'd opt for a smaller fin set-up...especially with the channels. Also, used the rasta quads and liked them...would probably suit you...have you looked on the future site given ur weight?

    Earl...where you at...????

  5. #5
    Join Date
    Dec 2010
    Location
    Virginia Beach
    Posts
    920
    Images
    2
    Quote Originally Posted by live4truth View Post
    I use futures and ride quads almost exclusively. I've had great success with fam fronts and the 375 quad rears (this was for a McKee set-up). I'm partial though to blackstix and like the vector foil. Given your weight I'd opt for a smaller fin set-up...especially with the channels. Also, used the rasta quads and liked them...would probably suit you...have you looked on the future site given ur weight?

    Earl...where you at...????
    i have the rasta quads on my RNF shape and i love them. the flex and release on them is great. definitely reccomned those

  6. #6
    Join Date
    Jun 2009
    Location
    Ortley beach NJ
    Posts
    370
    Images
    45
    hey guys thanks so much for your help! yea i did go on their website and put in my size info and ended up with the yu quad set. man i do regret having the futures setup though they all cost a pretty enny! but thanks again for all of your help!

  7. #7
    Join Date
    Aug 2009
    Location
    Monmouth Beach, NJ
    Posts
    2,443
    Here, brother...

    I'd advise that you start with the fins you have, or at least fins that are familiar to you. Chances are, what you're currently riding is radically different from that board, and that change is big enough for now. It's a six channel, but the channels are subtle... shallow and without crisp edges, toed in to sync with the fins, both fronts and rears. So while they will add drive, they will not be tracky. They will not act as fins, but will help direct water to flow with the rocker, template, and bottom contours, and facilitate fin lift. Once you've ridden it a few times, and start to get used to the board, THEN play with fins... or not.

    If you don't have a quad set, and must buy new fins for the board, consider test driving first. If you cant, think about downsizing fin base compared to your current thruster fins. Slightly shorter base for the fronts, and slightly smaller rears than fronts. A smaller template all around is also not a mistake.
    Last edited by LBCrew; Apr 10, 2013 at 12:32 AM.

  8. #8
    Im having trouble choosing between SA4s and Tim Stamps Future quad sets. Any thoughts?

    Im 5'11 195

  9. #9
    Join Date
    Jan 2013
    Location
    philly - margate
    Posts
    77
    Images
    1
    Quote Originally Posted by xJohnnyUtahx View Post
    Im having trouble choosing between SA4s and Tim Stamps Future quad sets. Any thoughts?

    Im 5'11 195
    same size as you and i ride the rasta quads and i love them

  10. #10
    I ordered the Stamps, Ill let you know how they are.