say you have a board as a regular squash tail and the bottom contours are single to double to a spraile v and you want a swallow tail do they put the spirale v in the back with the swallow tail?
Results 1 to 8 of 8
Thread: board question.
Apr 23, 2013, 04:46 PM #2
What do you mean by "spiral vee?" As I know it, a spiral vee is term used for double concaved vee bottoms where the double concaves run right out the back, and don't go to flat or panel vee behind the trailing fin. On swallow tails that type of bottom is sometimes called a "double barrel." But yea... it's done.
o yea i meant a v behind the trailer fin
Apr 23, 2013, 06:09 PM #4
- Join Date
- Sep 2009
- Crystal Coast,N.C.
Apr 23, 2013, 06:59 PM #5
A vee out the back is usually a panel vee, with flat panels. That's not a spiral vee. That's just, "vee out the back." A spiral vee has to have concaves, and it was originally used on rounded pins, but can be applied to pretty much any tail shape.
Apr 23, 2013, 07:08 PM #6Member
- Join Date
- Jul 2008
none of this **** matters at all, unless you surf for a living (and no one on here does). You have a V between your legs
Apr 23, 2013, 08:12 PM #8