LOGIN | REGISTER

Results 1 to 10 of 10
  1. #1

    Motorcycle Surfboard Rack

    Does anyone have one? Has anyone made one? Is there a good one online to buy?

  2. #2
    Join Date
    Sep 2012
    Location
    VA Beach
    Posts
    113
    Seeing as the surfboard would quickly become a sail in the wind, I would think you'd have to be going very, very slow for it to work without causing instability, etc. Probably too slow to legally be driving on any non-neighborhood road as a motor vehicle...

  3. #3
    I made a rack for my '75 shovel chopper. It worked perfect. I took a piece of metal (1/2" x 1" x desired length) and bent it into an L with about 4" on the bottom of the L. Drilled two holes and bolted the metal to my rear fender. Then put padding on the metal, put board on, and bungee to metal piece and then bungee to frame right under your leg. I could cruise at 60mph and no worries.

  4. #4
    see them a in C.R. they just adapt a bike rack to motorcycle frame. not the carver one but the old school looking one.

  5. #5
    buy a sidecar

  6. #6
    Join Date
    Aug 2011
    Location
    Wilmington
    Posts
    2,340
    There's a dude I run into occasionally at my neighborhood bar who has a customized early 70's Triumph cafe' racer with a custom side car like they use in racing (not sure what the circuit is called but I'm sure plenty have seen pics of what I'm talking about). Thing is completely bad ass, he keeps his boards strapped into the sidecar.

    My little brother just got a rack for his early 80's Kawa that seems easy to bolt on. I'll find out the brand of rack and let you know what it is.

  7. #7
    Join Date
    Feb 2012
    Location
    Carolina Beach
    Posts
    575
    Erock,

    Does the Sidecar have Dakine pads and straps?

  8. #8
    Join Date
    Aug 2011
    Location
    Wilmington
    Posts
    2,340
    Quote Originally Posted by CBSCREWBY View Post
    Erock,

    Does the Sidecar have Dakine pads and straps?

    Yep, you've probably seen him around CB too. Can't remember his name off the top of my head, but he's a really cool dude to talk to.

  9. #9


    always wanted to, but being a bit up north cruising down the parkway on my 70's era bikes doesn't sound too appealing. but if you're fortunate to be closer, go for it.

  10. #10
    Join Date
    Sep 2012
    Location
    Where else but TX
    Posts
    62
    Images
    2
    Limo Cart 3.jpg

    Customized one for my Golf Cart couple weekends ago with the help of my buddy who is a welder. Waves were flat, something to do. Of course the only picture I have of it is with a stupid umbrella in the rack. Oh well, you get the idea.