I read an article in surfer about it. They are not quite to boards yet. The fins they are making are not as sturdy as they would like. It may be awhile. I would think the combo of foam and glass might cause some issues. Probably easier if it were just one material.
Results 21 to 27 of 27
Oct 25, 2013, 03:46 PM #22Senior Member
- Join Date
- Sep 2013
Its definitely thinking outside the box! However, here's the problem....
It may work with sailboards or kiteboards etc... but when it comes to surfboards one of the first things I learned when shaping is about the foam. There's a reason why Clark Foam was so sought after and why there's only a couple of companies out there that good shapers use.
It actually has to do with the density of the foam and not just density but the spring factor. It sounds minut but really makes a huge difference! A soft or spongy foam makes for a crappy board! This is why good shapers haven't jumped on the whole eco thing or recyclable materials. Its because they just don't have the same spring or density as a good poly blank.
So while there is all these great ideas and new technology coming about no one has yet come up with a comparable "Clark" blank!
I'm open though to try it all!
Oct 25, 2013, 04:09 PM #23
It would be great to print out a fin plug if you accidentally break one.
NOTHING will ever completely replace hand shaped hand crafted surfboards. They are works of arts, each unique in every way and tailored to each surfers technical needs. The HUMAN ELEMENT can never be relaced by computers as much as we try. Hand crafted surfboards are the way to go. Many of the top professional riders such as Dane Reynolds are even admitting that nothing rides like hand shaped boards.
That's pretty crazy stuff. I think I might make boards the total opposite way. I guess there's more than one way to skin a cat. To each his own?
Oct 26, 2013, 06:12 PM #26
Put some sensors on the board, then we'll talk.