LOGIN | REGISTER

Results 1 to 10 of 10
  1. #1
    Join Date
    May 2010
    Location
    Jacksonville, FL
    Posts
    18

    Anyone reglass a surfboard nose with carbon fiber?

    Carbon cloth is like $5 a yard. I smashed the nose of my board, if it has to be reglassed anyway couldn't you just use the carbon under the surface?. Anyone try this or know if it can be done?

    Besides it just looks cool as ****...
    Attached Images Attached Images
    Last edited by Ecsrfr26; Jul 22, 2013 at 02:56 AM.

  2. #2
    I havent played around with carbon but from what ive heard its stiffer then fiber glass so itll be more difficult to wrap around the nose like in those pics. I dont see why you couldnt throw a layer of carbon on then maybe cover with a layer of 2-4 oz? You should try it and post some pics.

  3. #3
    Join Date
    Aug 2009
    Location
    Monmouth Beach, NJ
    Posts
    2,316
    Carbon is stiff, and hard to laminate with around tight curves without bagging. It's also brittle, so it's not really good for impact resistance. Does look cool, though...

  4. #4
    Join Date
    May 2010
    Location
    Jacksonville, FL
    Posts
    18
    Carbon fiber is stiff and brittle in a thin flat sheet of it, but the tapes are designed with flex patterns as a breaded-like design (It's not solid carbon). I think it definitely strengthens the rigidity and pressure resistance of the board, all the major surfboard companies are using it.. Al Merrick, Rusty, Sharp eye, Lost, HS and a ton of others. You can tell just by feeling it that it's way stronger.

    A lot of the tapes are hybrids as well, like Carbon and fiberglass, or carbon and Kevlar. not just straight carbon. The tapes are flexible otherwise the tape wouldn't roll.

    There's also straight Kevlar which would be less stiff, like on the coil boards. Another thing I was looking at. I'm really just looking at it out of curiosity because it would be really good for repairs, and also make a board with a snapped off nose look almost like it came with carbon.


    http://www.shapers.com.au/products/C...th-(BLUE).html

    http://www.fiberglasssource.com/suns...t_detail&p=554
    Last edited by Ecsrfr26; Jul 22, 2013 at 01:08 PM.

  5. #5
    carbon is strongest on a curve. good sheer/compression strength when used on curves. LBcrew is right. doesn't really have the compression strength when flat you might expect. not really stronger then 6oz E-glass or 4oz S. the tail strips everyone uses are wrapped over the rail for mostly for flex and because they look cool. cool sells. kevlar/carbon tape is good too but good luck trying to work with it if your not experienced.

    if your gonna do it, get the 4oz carbon/glass tape. surfsource has it cheap. easy to wet out. tape each end so you can pull it tight and avoid wrinkles in the carbon strips. ask them to roll it not fold it. cut with super sharp scissors. dont sand the carbon.
    Last edited by AtanticO; Jul 22, 2013 at 01:45 PM.

  6. #6
    Join Date
    May 2010
    Location
    Jacksonville, FL
    Posts
    18
    Is it self adhesive or do I need something to make it stick, or do I just lay it and laminate over it?

  7. #7
    Quote Originally Posted by Ecsrfr26 View Post
    Is it self adhesive or do I need something to make it stick, or do I just lay it and laminate over it?
    wet out the surface your applying it to first if it's on foam, then laminate. and/or you can give it a quick light spray of 3M super77 to stick it. then wet out tape. carbon/glass tape wets out easy. you should definitely mask off around the area you want the carbon tape to go. glass right over that, then cut along that tape edge (so careful) with a razor blade. make sure to put masking tape on the ends of the carbon strips. perpendicular to the carbon with the glass fill, or you'll end up with wiggles in the carbon strips. got all that? lol
    Last edited by AtanticO; Jul 23, 2013 at 12:02 PM.

  8. #8
    Join Date
    May 2010
    Location
    Jacksonville, FL
    Posts
    18
    Thanks for the input, I just picked up a few feet of carbon/fiberglass hybrid tape. Not expensive at all, like $2.40 a ft. We'll see how it goes.
    Last edited by Ecsrfr26; Jul 22, 2013 at 08:53 PM.

  9. #9
    Quote Originally Posted by Ecsrfr26 View Post
    Thanks for the input, I just picked up a few feet of carbon/fiberglass hybrid tape. Not expensive at all, like $2.40 a ft. We'll see how it goes.
    post a pic when done

  10. #10
    Join Date
    Aug 2009
    Location
    Monmouth Beach, NJ
    Posts
    2,316
    Quote Originally Posted by Ecsrfr26 View Post
    I just picked up a few feet of carbon/fiberglass hybrid tape. Not expensive at all, like $2.40 a ft. We'll see how it goes.
    Nice. Should have mentioned it earlier, but AO got you on the right track: There's carbon/S-glass hybrid cloth or tape out there, which would be ideal, because it gives you the added impact resistance. And sometimes you can get it in different carbon-to-glass ratios... I think. Not sure. But hybrid tape is definitely the way to go. Good call.