LOGIN | REGISTER

Page 1 of 3 123 LastLast
Results 1 to 10 of 22
  1. #1

    Firewire Dominator on CL

    What would you pay for a used Dominator? The seller is asking $480

  2. #2
    Join Date
    Aug 2008
    Location
    Berlin MD
    Posts
    458
    Depends on the condition of the board. With the information supplied, I guess I'd pay somewhere between $0 and $480.

  3. #3
    We'll assume its in good condition. Some yuppie bought it and turned out he hated surfing. It's seen more time in the closet than in the water

  4. #4
    Join Date
    Aug 2008
    Location
    Berlin MD
    Posts
    458
    Sorry for the sarcastic response... Firewires seem to run around $700 - $750 new so if you can be sure that it's actually been well taken care of/VERY lightly used, and you really want that board then $400 $450 might be a reasonable price given what the "yuppie" probably spent for it IF its in near new condition. Can you be sure this yuppie hasn't spent the last year with the board on the roof of his car driving around town looking cool while not surfing?

    Would you consider spending nearly as much for a used Firewire as it would cost you to get a brand new locally shaped board? There must be guys in the VA Beach OBX area that will make you a nice custom for $500.
    Last edited by scotty; Aug 17, 2013 at 11:04 PM.

  5. #5
    Is it a 6.4?

  6. #6
    Yes it was. Then I went to WRV to look around and brand new Nuggets are selling for less than this board.

  7. #7
    I bought mine for $350 and it came with a small ding on one of the rails and some funky epoxy patch job on the tail. I did a little repair work on it and it surfs great. I would say if the thing is repairable then you are getting a decent deal. $400 sounds more like it though.

  8. #8
    Quote Originally Posted by Bill Cosby's nephew View Post
    Yes it was. Then I went to WRV to look around and brand new Nuggets are selling for less than this board.
    i've been eyeballing the "Fugget" (even wider and flatter than the nugget) myself, but yeah, buy a nugget. I don't know how to fix firewires so I probably wouldn't bother with one. They ARE sick though. I really like the potato series.

  9. #9
    I'm probably gonna pick up a nugget this weekend. I'm 6'2 but have never owned a shortboard before so I'll most likely try to get a 6'2

  10. #10
    Join Date
    Jan 2009
    Location
    milton delaware
    Posts
    1,436
    Images
    262
    Quote Originally Posted by leethestud View Post
    I don't know how to fix firewires so I probably wouldn't bother with one.
    IMO TOO hard to fix. These boards for some reason seem to "breathe". I've repaired the old ones with a vent plug, and a newer one w/o the vent plug. Parts of the inside are very porous and dont hold the resin long enough for it to set up, other times it seems like air is seeping out of the core, and immediately starts bubbling up your repair by exerting air pressure from the core outward. Not easy at all to fix with your normal resin/cloth/q-cell. They may be great boards but is that much "tech" really necessary for your or my surfing?