close ad [x]

Results 1 to 3 of 3
  1. #1

    Glass on fin broke off, replacing with fcs

    I'm poor, found an old board at a friends who doesn't surf so decided to do a little work on it. I cut out 2 boxes to get the fin in snug and align it with the setup. Was about to start with some resin I have but thought I'd ask first. Should I just use lots of resin and make layers of that until its solid or should I use some cloth as well? hmm..

  2. #2
    Join Date
    Dec 2007
    Location
    Charleston
    Posts
    1,552
    Images
    8
    Quote Originally Posted by patgeds22 View Post
    I'm poor, found an old board at a friends who doesn't surf so decided to do a little work on it. I cut out 2 boxes to get the fin in snug and align it with the setup. Was about to start with some resin I have but thought I'd ask first. Should I just use lots of resin and make layers of that until its solid or should I use some cloth as well? hmm..
    Definitely use cloth. Plenty of info on youtube.

  3. #3
    Join Date
    Feb 2012
    Location
    Carolina Beach
    Posts
    913
    CLOTH!!! Resin alone will fail almost immediately. I've learned by trial and lots of errors.


Place this code at the end of your tag: