LOGIN | REGISTER

Page 1 of 4 123 ... LastLast
Results 1 to 10 of 32

Thread: 3d fin printing

Hybrid View

  1. #1

    3d fin printing

    The first prototype 3d printed warp Drive fins have been created in ABS and one was tested to destruction, the results showed adequate strength.

    http://matrixsurfboards.blogspot.co....net-venus.html



    Now we have moved on to stronger polycarbonate material:

    http://matrixsurfboards.blogspot.co....le-fin-3d.html



    http://clicktotweet.com/7O9XE

  2. #2
    Join Date
    May 2013
    Location
    confederate states of america
    Posts
    1,607
    Images
    4
    fak off. you nz anti american doosher.

  3. #3
    Quote Originally Posted by sandblasters View Post
    fak off. you nz anti american doosher.
    Request declined and I'm not anti American, I just don't like the current government of the USA and their interference in other countries.

    This thread's about 3d printing fins, so stay on the topic.

  4. #4
    Join Date
    May 2013
    Location
    confederate states of america
    Posts
    1,607
    Images
    4
    fine..you antisemitic?? ffs can this make your boards do a proper turn? if so ill buy the hot kurl and turn it into a hawt karl.

  5. #5
    Join Date
    Sep 2013
    Location
    ethernet
    Posts
    3,066
    what material?
    what printer? maker bot?
    I dont think it can handle the torque. Can it print around a piece of cloth for added strength? or embed some cloth some how?
    Can you print W.A.V.E.S.E.T. fins?
    how much does more it weigh than comparable fins

    This does have promise but I don't see it having the strength needed

  6. #6
    Quote Originally Posted by MakeItStop View Post
    what material?
    what printer? maker bot?
    I dont think it can handle the torque. Can it print around a piece of cloth for added strength? or embed some cloth some how?
    Can you print W.A.V.E.S.E.T. fins?
    how much does more it weigh than comparable fins

    This does have promise but I don't see it having the strength needed
    We've tested the weaker ABS version to destruction and the strength is fine, so the polycarbonate should be also.

    We are also getting laser sintered titanium versions done and they will be just about indestructible.

    The printer has much higher specs than home printers like the maker bot, the chamber is heated to increase strength and eliminate distortion.

    By the way printing 'around cloth' would be completely pointless as most of the strength is in the skins and the cloth would be on the neutral axis where it would contribute almost nothing.

  7. #7
    Which 3D printer are you using?

    Quote Originally Posted by Roy Stuart View Post
    We've tested the weaker ABS version to destruction and the strength is fine, so the polycarbonate should be also.

    We are also getting laser sintered titanium versions done and they will be just about indestructible.

    The printer has much higher specs than home printers like the maker bot, the chamber is heated to increase strength and eliminate distortion.

    By the way printing 'around cloth' would be completely pointless as most of the strength is in the skins and the cloth would be on the neutral axis where it would contribute almost nothing.

  8. #8
    W.A.V.E.S.E.T fins can certainly be printed, if I can get hold of one to copy the base and/or foil.

  9. #9
    do you have the data to makes FCS fins as well? the picture seems to be showing future fins.

  10. #10
    That's a singlefin with tab for a standard box, well be doing FCS tabs also, I have the specs somewhere...