LOGIN | REGISTER

Page 1 of 10 123 ... LastLast
Results 1 to 10 of 93
  1. #1

    WARP Drive BLEF foil fins ready to go

    We've been through some improvements and have done strength testing, so the fin is now ready for sale, pin, plate and screw included, free shipping. Fin is hand finished to 1200 grit.

    Get 'em here:

    http://matrixsurfboards.blogspot.co....lable-now.html

    If anyone wants a 6 or 7 inch version ( or indeed any custom size, 8 inch max) we can do also.




  2. #2
    That looks deadly. I've been stabbed in the foot twice by fins, but that bad boy would take a leg off.

  3. #3
    Will this fin be able to transport me to to the future?

  4. #4
    Quote Originally Posted by chicharronne View Post
    That looks deadly. I've been stabbed in the foot twice by fins, but that bad boy would take a leg off.
    The leading edge is not sharp, the bumps are smoothly rounded to the foil shape and the fin is definitely safer than a typical thruster fin, the polycarbonate has some 'give' to it as well, stiff and strong but we've bent one over thirty degrees during strength tests.

    .

  5. #5
    Quote Originally Posted by surfsolo View Post
    Will this fin be able to transport me to to the future?
    Certainly, being a postmodern creation it exists in all moments of time and so does the user.

  6. #6
    Are they under $100K? If so it's a steal!

  7. #7
    Quote Originally Posted by nynj View Post
    Are they under $100K? If so it's a steal!
    Absolutely, you can get them for the dirt cheap price of $199NZD or $164US for us yanks.

  8. #8
    Join Date
    Jul 2013
    Location
    York Maine
    Posts
    740
    Images
    5
    Roy I'll need to get one to put on my PP retro I've been speaking of on swaylocks. I have been hand foiling a plywood fin with the leading edge bump.. Good god it's hard to do. I think your 3d printing is a pretty solid idea.

  9. #9
    I knew I've seen that shape before. On Nat Geo.

    warclub.jpg

  10. #10
    Quote Originally Posted by Charles Taylor View Post
    Roy I'll need to get one to put on my PP retro I've been speaking of on swaylocks. I have been hand foiling a plywood fin with the leading edge bump.. Good god it's hard to do. I think your 3d printing is a pretty solid idea.
    Stoked I think you'll enjoy it.

    As you say it's hard to do foiling those BLEFs, I've put in over 30 hours on some, pretty crazy. The printer takes 8 hours...