I was thinking about using a razor for a really sharp, straight cut. But then I just realized I wouldn't be able to do anything about the threaded seams, they would eventually start to come apart. Well, I guess I could fuse them.
Results 1 to 9 of 9
Jul 23, 2014, 05:37 PM #1
Cutting Sleeves Off 3/2 to Make S/S Full?
worked fine for me on an old 3/2 back zip, never came apart/unraveled. i just used scissors.
neoprene glue. Your surf shop should have it.
Jul 23, 2014, 05:43 PM #4Member
- Join Date
- Jul 2008
took me 30 seconds to cut mine with scissors 3 years ago and its still fine
Jul 23, 2014, 05:50 PM #5
Jul 23, 2014, 08:46 PM #6
Be careful if you put anything on the seams. Back in the day I did the same thing and used aquaseal on the seams. The aquaseal didn't stretch so it had to break or be carefully cut so you could get the suit on. All of those little breaks/cuts scratched the crap out of my arms.
Jul 23, 2014, 11:28 PM #7
Jul 24, 2014, 12:07 AM #8Member
- Join Date
- Sep 2008
- easternshore md.
Cut my old 3/2 full and made a springsuit that was 4 yrs ago and its held up fine. Get some sharp scissors.
Jul 24, 2014, 12:26 AM #9