Got this gash on Tuesday. Hopefully you can see in the picture how it goes down at least an inch. Guessing I need to fill the hole with something before I patch over it - what material should I use?
The waves were well worth it, though...
Help fixing a ding
Got this gash on Tuesday. Hopefully you can see in the picture how it goes down at least an inch. Guessing I need to fill the hole with something before I patch over it - what material should I use?
The waves were well worth it, though...
Q-Cell and resin.
Thanks. So just fill it, let it dry, sand the filler, then patch over it?
yep pretty much....just mix the Q-Cell and resin together....Pour in Q-Cell in a plastic cup and add small amounts of resin into a plastic cup until it gets to the desired thickness. Then add your hardner.......mix....then just pour into your ding. Make sure your board is dry though. No dampness. Let it dry...After, sand down and apply a fiberglass cloth on top then just resin and hardner. Let it dry then sand again. You can buff out the area if desired.
Last edited by Aguaholic; Oct 23, 2008 at 05:04 PM.
Much appreciated, thanks!
not sure aobut dings but this one helped with info on fin repair for me
http://surfsource.net/dingrepairguide.html#dings
Just take it somewhere and pay $20 to fix it. It'll look and feel much better than anything you can do. Now if you just want some practice, then thats something else...
that hole is an easy fix - fill, sand, patch.
However
In all honesty it looks like you've got a more serious issue with that futures box. A crack is visible on the flange (near the set screw hole and also from the back of the fin out to the rail?), which means the box has been tweaked and the brown foam stain means you've taken on water and it looks like a pretty large area...hopefull not just a dark photo? If so, you might want to deal with THAT while your at it.
Last edited by scotty; Oct 23, 2008 at 05:06 PM.
I use sun cure for most all of my board fixes. Find it easy to use and without the hassle of mixing. Is there a disadvantage to using sun cure on most dings and punctures?
And how exactly does one get such a ding in that particular location at that particular angle? Please share.Originally Posted by matthwh610
Reply With Quote
