Just picked up used board with a bunch of dumb stickers on the bottom. Started taking them off but adhesive is sticking to board and would likely create extra friction. Anybody know the best stuff to get the stickers and gunk off or a good home remedy maybe.
Lacquer thinner may be too abrasive. Test it in a small spot first. Definitely either WD-40 excellent adhesive remover, or some acetone, found in nail-polish remover.
Then, a razor blade and some patience, and a steady hand will do the trick.
Acetone is a fiberglass thinner or cleaner and I wouldn't recommend using it on a surfboard. Lacquer thinner is the main ingredient in 3m adhiesve remover and Goof-Off. You'll be fine using it just don't let it set for a long period of time. Put a little on a paper towel or rag and rub the area you need to clean.
i got a new board a while ago and couldn't get the adhesive from the price tag off with anything, goo-gone and all that stuff wouldn't do anything, i finally resorted to lighter fluid, it came right off no problem.