I just bought a 5'9 quad nugget from wrv today. its great and swick but the middle/back fins wont fit in. They are futures what should i do????

I just bought a 5'9 quad nugget from wrv today. its great and swick but the middle/back fins wont fit in. They are futures what should i do????
make sure theres no extra glass or resin hanging over in the top edges of the fin box....if there is take a razor and gently scrape the inside edges of the boxes until the fins go it....i had to do this once.
I've had the same problem... There's two different base depths. I didn't feel like going back to the shop, so i took a table saw a shaved 1/8" off the bottom. The shop should help you out though.
dont be a mo just sand the fins a little you a woman or a man if you are a woman I will sand them if you are a man go ahead sack up and do them your self.
Look closely at the rear boxes if they have X's in the front near the grub screw you need the 1/2 base rears. Did they sell you the fins with the board?
The bigger ones go in the front and you need to buy a quad specific set with the 1/2" rears. Support your local shop if they have what you want or they can special order it if they are willing. If you dont have shops close by try ebay.
Last edited by myxamatosis; Jul 1, 2009 at 01:31 PM.