LOGIN | REGISTER

Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Join Date
    Jul 2008
    Location
    Long branch
    Posts
    664
    Images
    16

    surfboard sizes?????

    im looking for a new board, and do you guys think that a 5'7, 2 inch thick, 3 fin, chemistry board is too small for me, im 5'8 and 119 ilbs.

  2. #2
    your surf shop owner should be able to put you on the right board based on your weight, height and skills.... as for 2" thick it will probably float you....but i think you might need juicy waves for it....

  3. #3
    It depends on your talent level and how big of waves you prefer to ride it in. It won't do much good on 2 foot chop, but on some chest+ high glass it would stand out more.

  4. #4
    Join Date
    Apr 2008
    Location
    In a state of flux
    Posts
    3,305
    instead of going to a shop, contact a local shaper and work with him to dial in your dimensions for the best possible board. Somebody like Jon Ashton or Mike Hague willl steer you in the right direction for our waves.

  5. #5
    yea ... dont support the local surf shop... just the local shaper ... what are you thinking?

  6. #6
    Join Date
    Apr 2008
    Location
    In a state of flux
    Posts
    3,305
    cause most local shops will put you on a board just to get your money. if you know the shops well and trust them, by all means hit them up but the local shaper will dial you in better since they make the board from scratch custom to your ability and dimensions, not trying to find you something they have in stock (like a shop)

  7. #7
    not saying that either mike or jon would have this happen but isnt it possible the board could end up really not working for you and just end up being a custom piece of crap.

  8. #8
    Join Date
    Nov 2007
    Posts
    1,538
    Images
    5
    If you understand board design or trust your shop you can easily get a board off of the rack that will ride just as good as a custom. Unless a shaper knows you well has seen you surf in every conceivable condition there is no way he can make a magic board just by weight and height measurements and asking you your skill level. Most people over estimate their ability or just plane lie when they tell a shaper this stuff.

    A custom board has most advantages for advanced surfers who understand how to communicate the short comings of their equipment to a skilled shaper who can fine tune the design to fit. For a beginner a cutom board can be cheaper, you get to meet the person who actually shaped the board (rather than a machine cut board from who knows where) and supporting a guy who is probably struggling to make a dollar.

    I have done both and both are fun and have given me great boards. Better yet try shaping one for yourself, that is the most fun of all and I guarrantee no matter how ugly a homemade board may be it will catch waves and it will be surfable. I have done 3 so far and each has been better than the last with my most recent being the best board I have ever ridden from any source.

  9. #9
    Join Date
    Jan 2009
    Location
    milton delaware
    Posts
    1,526
    Images
    267
    Quote Originally Posted by chrisd View Post
    not saying that either mike or jon would have this happen but isnt it possible the board could end up really not working for you and just end up being a custom piece of crap.
    Stock-off-the-rack boards end up not working for the rider more often than customs IMO. Usually this happens when the buyer can't judge how much volume and rocker a board has by looking at it, doesnt ask the right questions, and isnt realistic about their abilities. I''ve been riding Jon Ashton customs and Mike Hague customs for years, and every single one has been a real solid board, that rode well for me.

    As Zippy said, if you know boards and are realistic about your needs you can absolutely get a fantastic board right off the shelf. I wouldn't hesitate to buy a non-locally shaped board off the shelf if i thought it would be the best option. For example, Matt Biolos has been shaping round nose fishes for over a decade, presumably refining the design, they obviously kill it in the kind of waves we get around here a lot, and I can't imagine why anyone would feel any guilt in buying one. i sure wouldn't.

  10. #10
    Join Date
    Apr 2008
    Location
    In a state of flux
    Posts
    3,305
    I just had Ashton copy a lost RNF template and tweak if for me.

    What it really boils down to is trust. If you really know the shop guys and trust them, they will put you on the best board they have in stock or order a custom for you. I've worked with Jon for 25 yeas and trust him to tell me if an idea i have is full of it. I don't trust the OCMD shops to steer me right and I was friends with most of them when I surfed down there.