LOGIN | REGISTER

Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20
  1. #11
    Just thought I would throw my $.02 in as well...

    I think the experience and knowledge that you can glean from glassing on fins (working with cants, toe-in, etc) would really benefit you as you begin to build your own boards in understanding how fin placement affects your board (the plus as well is when you want to move them around just grind them off do some sanding and replace them elsewhere).

    However, if you are set on going toward a system....I have shaped/glassed a number of boards with most of the major fin systems and think that futures are great, but it may be worth your while to first try to use a system that you can glass in post lam for your first couple of boards or so. The great thing about futures is that they are first routed and then glassed over, but I think that it would benefit you to work on one step at a time without the undue stress of routing prelam, making sure the boxes are flush, filling the route with resin, laying patches, etc (you can do futures post lam, but I believe it can affect the integrity of the system...as well you havel the worry of possibly over/under routing). Further, unless you plan on regularly making your own boards...i am not sure if I would drop $150 (or more...foamez) on the kit. Realistically, probox would probably suit your needs a bit better in light of the fact that kits are relatively inexpensive (jigs and route, fins boxes at $55ish from Greenlight), and are glassed in post lam. The traditional FCS could also work, but you would either have to buy another kit, or personally make the jigs...which is somehting that you may not be interested in...that is not even addressing the structural strength of that system if installed improperly.

    All that to say...I think that Yankeeboy is right on. Probox is probably a good call and you would get more bang for your buck as well as a very reliable fin system. Also, would love to see some pics of your finished product...keep me updated!
    Last edited by live4truth; Oct 29, 2009 at 04:17 AM.

  2. #12
    anybody interested in throwing a thread together with just pics of some diy boards i tried searching it to see if there was one already and didnt find anything. id like to see what everybody elses homemades look like
    ________
    buy vaporizers
    Last edited by JDallam; Jan 19, 2011 at 06:00 AM.

  3. #13
    Join Date
    Jan 2009
    Location
    milton delaware
    Posts
    1,450
    Images
    264
    few year back...this board rode well for a long time then i sold it on e-bay for $180. Cost of materials covered!
    Fun glassing with poly resin...black, yellow, red and white pigments in dixie cups..kick off slooow! trained eye can see the colors blended to mud on the rails from squeegee buildup.

    O'fishl boxes (same as futures basically but for some reason these things were popular 10 years ago) installed "old school" like the guys posted above...trace out the location, use dremel tool to dig out the foam. No problem..no expensive kits. its no way to install fin boxes but if you make one board a year you can afford to waste an hour with the dremel.


  4. #14
    Join Date
    Nov 2007
    Posts
    1,488
    Images
    5






    This is my most recent. Not sure if I like it yet. I'm always messing with the rails trying to come up with something new. This board has a chine off the bottom coming up to a 50/50 rail after a hard down on the tail. It paddles like a machine but is has almost no bite when on rail so when you put it on it's side watch out. This same rail design worked great on my last board but that one was super thinned down into the tail which made it bite more on edge. I might learn to love this one over time who knows. Hope you like it. BTW It is 5'5" and just over 2.5" thick at it's thickest.
    Last edited by Zippy; Oct 29, 2009 at 07:11 PM.

  5. #15
    Zippy- Nice looking board. "the pug" seems to be the perfect name for it. Those pinlines are awesome as well, are they resin or acrylic?

    Here are some pictures of a few of my projects...

    #1- 6'3'' x 21" x 3" Quad Fish. 2# EPS with PVC stringer and Greenroom epoxy. This is the one I mentioned my previous post that fell off the wall. I am currently debating whether to reshape it or repair it.

    #2- 6'6'' x 19" x 2 1/2" Thruster. 2# EPS with PVC stringer and Greenroom epoxy. I meant this board to be a step-up for winter/hurricane surf but its my go-to board now.

    #3- 7'4" x 20 1/2" x 2 1/2" Minimal. 2#EPS with PVC Stringer and Greenroom epoxy. Only rode it three times. It was a gift for my (ex)girlfriend, we broke up, I havnt seen it since. I suspect she might have put it through the wood chipper. 11 hours of airbrush down the drain.





    #5- 6'8" (?) funboard- This pic was taken before I sanded the laps and laminated the deck. I shaped it for my room mate who is stationed in Pensacola now and I dont think its ever seen the water yet. Paint job was inspired by airplane nose art (hes a pilot).



    #6- 6'5" Compsand Thruster- This is my first attempt at a compsand. Its a 1# EPS blank (a piece of packing foam i found in a dumpster) with DOW foam rails. This pic has the balsa wood layed up on top of the blank before it went in the vac bag. The board is just about done now, all I need to do is sand the hotcoat.

    Last edited by YankeeSpy; Oct 29, 2009 at 08:21 PM. Reason: Resize images

  6. #16
    Board #7 is sitting on my bed at home right now. Its a 6'5'' compsand construction. I have the rocker cut on the blank (another piece of dumpster foam) and balsa veneer layed up and glassed. Its going to have 2oz under the balsa and 2oz+4oz over. The DOW extruded cell (similar to XTR) was a ***** to shape on the last one so I might try divinycel i can find some cheep. I estimate in will weigh about 5lbs but i have no idea when im going to finally get around to.

    JDallam- Here is a close up of the proboxes on the fish. I used the McKee Quatro setup which can be found on his website.


  7. #17
    Here is one I made during the summer--never had any finished shots (the first pic is the board post lam b/f the filler). JD this is the only board that I have ever done dropping in futures post-lam and not having a problem (probably b/c I used epoxy over poly). Anyway, totally love this board (MTF inspired)...super fun in flatter surf with a bit of push. I'll even throw in an action shot...this shot was from the first sesh I rode it in!



  8. #18
    Here is one of my newer boards, dims are 6' 0 x 18 1/8 x 2 3/16 with a single concave all the way through and lokbox fins




  9. #19
    Join Date
    Jan 2009
    Location
    milton delaware
    Posts
    1,450
    Images
    264
    5'10" x 21" x 2.5" Fish made from a Rhino Foam poly kneeboard blank - epoxy glassing...futures fins..note the fin football patches pick up extraa pigment color. I do them with clear resin now. pinline is black pigment over the lamination under the hotcoat.




  10. #20
    Hey JDallam

    Check out the surfer/shaper picture gallery on Greenlight's website:

    http://www.greenlightsurfsupply.com/...e_Gallery.html

    Most pics are 1st time builds with the Greenlight method.

    All the best

    ~Brian

    www.greenlightsurfsupply.com