Don't worry my man, I know better than to go there without the booties, and I got some fin savers there before a few years ago cause I haggled them when I lost a Custom X fin and tried to get them to sell me the store display model, since I only needed one. Well they wouldn't so I ended up buying a new pair, and they threw in the fin savers for free. That left me with 3 fins all the same, which (go figure) I lost one of them in NC and didn't bring the backup fin. THUS, led me to get the Eon fins.
So the story comes back around again.
I got the Vipers there last winter during a sale and I tried them on with the booties and immediately knew that it wouldn't work out. So I bought them anyway and waited till summer to use them and they have been the best fins I've had to date. Those "Original Techs" look pretty decent so I might end up coming home with a new set.
While on the subject of winter gear.... how about winter bodyboards? I learned that some boards are just too stiff for the cold water in winter, anyone know of some decent boards that give a decent amount of flex, but hold their rigidity? I've been looking at some Nomad bodyboards in the 42.5 range or something along the lines.. the one I am looking at has a variable flex triple stringer, which I'm thinking might be too stiff. Right now I'm using a board with double stringers. Any positive input is desired.
Results 21 to 30 of 31
Thread: Winter Swim Fins
Nov 3, 2009, 12:03 AM #22
- Join Date
- May 2006
- Lewes, DE
wearing fins over booties can make such a big difference.
You should bring your booties into a shop, and try on some different fins to see which ones fit best.
My summer fins fit great, but any 3mm or 5mm booties makes my feet really cramped up and uncomfortable. For me, if I go up a size, then they are too big.
So, you might just have to switch brands, until you find the one that fits right with your booties. You are of course going to have your favorite brand, but if they dont fit with your booties, then they are worthless.
Nov 3, 2009, 12:05 AM #23
when i use the shoe lace as a fin teather,i tie them in a loop,then loop it around the fin.then,i slide a barrel clip or some kind of bead down on the string,that way when i put my foot through the loop,then in the fin,i just sinch the bead or barrel clip up to the back of my ankle.viola! you have a very effective cheap-@ss fin teather
see my attachment bellow of my homemade jobbie-jobs.you can kinda see how'd they'd go on your foot & fin.i can take another photo of them on if anybody wants to see them on a fin & foot
Last edited by bodyboarddude; Nov 3, 2009 at 12:09 AM.
Nov 4, 2009, 03:14 AM #24Senior Member
- Join Date
- May 2006
- Southern Coastal Delaware
ECsponger check your PM's
I have bud I will reply tomorrow
Nov 4, 2009, 03:28 PM #26
Block Surf makes an inexpensive but solid fin tether that is great for warm & cool water (effective circumference up through 3/2 wetsuit + 1mm or 2mm wetsocks). For cold water I would recommend contacting Jay Reale, ebodyboarding.com, to find out what he has in stock that has an extra long wraparound ankle strap (for 6/4 wetsuit and 5mm to 7mm of fin socks) and an easy to grab pull tab on the lycra strap (because when you fingers are numb it is hard to get a good grip).
Nov 4, 2009, 09:09 PM #27Junior Member
- Join Date
- Sep 2009
Nov 5, 2009, 01:33 AM #29
nice,this is the official swellinfo bodyboard thread awsome
I didn't even know they were EON, the box just says "e"
bodyboarddude, I know how to start a decent topic and keep it rolling.
Yah someone said Bethany Beach Surf Shop had em. My buddy, the one who lost one to begin with was going to buy them for me but they only had size L.
I contacted Liquid and asked them, but no response yet.