My school is having state testing for Jr. and the people who passed it last year have to take internships. I would be grateful if any photographers or shapers would allow my friend and me to watch, help out, or what ever we can do to help out. We dont need transportation, just the opportunity. Its around march. If anyone doesnt mind we would like to see how it's done.
Email me with any information. Thank you
Results 1 to 4 of 4
Feb 4, 2010, 02:26 AM #1Member
- Join Date
- Oct 2009
- Long Branch
Last edited by chrys1119; Feb 4, 2010 at 01:15 PM.
Feb 4, 2010, 01:14 PM #2
I run a shaping class at Brookdale Community College that runs four consecutive nights, starting March 15. We build a board, start to finish... except for the final sanding... that goes to the lucky guy who wins the board at the end of the course and takes it home. The down side for you is the college is gonna make you pay to take the class. Call the school or check out the online catalog for more info.
You run that class at Brookdale??? My buddies and I were just talking about that yesterday. The only down side of the class seems to be that the class only makes one board. What if someone in the class wanted to bring their own blank? Probably no an option but it would be so much better if everyone got to make their own board.
I'm still thinking of taking the class; what else can you tell me about it?
Thank is advance!
Feb 4, 2010, 11:12 PM #4
My suggestion to everybody who takes the class is to get all the materials to build a board (Greenlight Surf Supply is who I use: greenlightsurfsupply.com ) and build a board while you take the class. Learn a step at night, do the same step at home the next day on your own board while it's fresh in your mind. Learn the next step the next night, do it the following day on your own board, etc. You'll get a board done in four nights (except for the sanding, which we don't do indoors!). We tried to get everyone to build their own board when the course first started, but it became prohibitively expensive... the cost of the class, plus the cost of all the materials and tools was out of reach for most people interested in the course. Plus, some people didn't need tools, some didn't need materials, some just wanted to see how it's done... so it just didn't work out that way, even though that was the original concept. We also thought about a separate shaping class, glassing class, artwork class, etc., but again, we didn't feel we'd be able to meet a "break even" point. The course is a good way to break into the craft, gives you a ton of knowledge and information, and you walk away with a packet of material that includes design theory and step-by-step shaping and glassing guides. Plus, you might win the board... we pick names out of a hat for a winner.
Last edited by LBCrew; Feb 4, 2010 at 11:14 PM.