LOGIN | REGISTER

Results 1 to 10 of 18

Thread: Noserider Fin

Hybrid View

  1. #1

    Noserider Fin

    I just got a new mini longboard from islesurfboards.com (heres the board: http://www.islesurfboards.com/epoxy-...nlines-80.aspx) I was wondering what fin i should buy for it. I want to do some nose riding but idk if this board can used for this. Any suggestions.

  2. #2
    are you a really small person? thats the only way your going to get to noseride that board. ive tried on 8 ft boards before but they just arent made for it. i can get one foot over the nose but the other has to be way back and it just looks goofy. im 6'2" 175 lbs

  3. #3
    Join Date
    Aug 2009
    Location
    Monmouth Beach, NJ
    Posts
    2,414
    I'm 6'1 190lbs and an 8'6 is the smallest I can even consider sticking 5 out on.

  4. #4
    I can't bring up the link for some reason but I have a 7'2 Walden Mini Magic. I am 6'2 200 and I can get some nose rides on it. I ride it as a 2 + 1 with a 6" center fin. Remember that when you put the center fin in the closer to the tail the more stabilty you get and the closer it is to the side fins the more manuverable it is. Nose riding on these boards isn't the easiest but you can. I would say a 7" fin should be a good fit.

  5. #5
    Join Date
    Jan 2010
    Location
    Cape May Co, NJ
    Posts
    470
    Unless your light thats gonna be a stretch. The fin set up really does not make a longboard or a mini mal for that matter a noserider. Rocker, rails, bottom configuration, nose, & tail all make up a noserider. That being said - a longer fin with a wider base (pivot / hatchet) will help to stabilize the board for better time on the nose. I would also run a single fin when noseriding. This is what works for me. I have seen really good surfers get on the nose of boards that defies logic. I don't know how they do it.

  6. #6
    Join Date
    Oct 2009
    Location
    CAPE MAY ,NJ
    Posts
    2,894
    Images
    5
    Quote Originally Posted by Recycled Surfer View Post
    Unless your light thats gonna be a stretch. The fin set up really does not make a longboard or a mini mal for that matter a noserider. Rocker, rails, bottom configuration, nose, & tail all make up a noserider. That being said - a longer fin with a wider base (pivot / hatchet) will help to stabilize the board for better time on the nose. I would also run a single fin when noseriding. This is what works for me. I have seen really good surfers get on the nose of boards that defies logic. I don't know how they do it.
    I was gonna say all of that LOL

    I would get a bigger board with some nice tail rocker and full to semi full rail. I use a 11 inch Pivot fin on my 9'10 and a 10.5 on my 9.8. I keep my fin a half a inch from the front of the fin box. I can trim very easy and work the nose very well .

    heres a good read on nose riding . I helped my tip time alot

    http://noseriding.com/pages/TomWegen...ingonWater.htm

  7. #7
    Join Date
    Aug 2008
    Location
    NJ
    Posts
    412
    Images
    4
    First of all, a word on the company, Isle... as I've mainly only seen these sold on Ebay. Having bought a new board to beat up from Ebay, they are really low quality, and fairly heavy and unresponsive. (it wasn't an Isle board, but all these low quality, low price boards seem to be made the same). So just keep that in mind.

  8. #8
    Quote Originally Posted by MATT JOHNSON View Post
    I was gonna say all of that LOL

    I would get a bigger board with some nice tail rocker and full to semi full rail. I use a 11 inch Pivot fin on my 9'10 and a 10.5 on my 9.8. I keep my fin a half a inch from the front of the fin box. I can trim very easy and work the nose very well .

    heres a good read on nose riding . I helped my tip time alot

    http://noseriding.com/pages/TomWegen...ingonWater.htm
    Hey Matt,
    thanks for the link. that's some great information. Hopefully it will add to my tip time.