i have a true dumpster diver board that i found last summer...in a trash bin. Its a 6'8" T.Patterson that had loads of cracks and dings. I fixed them all this winter and now its an absulutly sound board. Perfect for hurricane swells. Only thing is that its yellow, really yellow, and white spots all over from the repairs. I need to spray the whole board first. I was thinking of copying Tom Curren's black beauty board.
I saw this in surfer magazine... But one thing you can do is just put dish washing soap on your board in some swirly patterns and what not, the just spray paint over it. The paint wont stick where the soap is, so when you hose it off, you end up with these nice organic swirly patterns. I've never done it before, but it looked pretty cool in the article.
I use Sharpie Paint Pens and they're friggin' amazing. Use Acetone on the board(scrape off the wax of course), just put some on a rag and lightly move it over the board, then wet sand it with 400 Grit Sandpaper. I always do a pencil sketch before i paint so i know where and what I'm painting. After your done painting, Use Kyrlon's Clear coat Satin. It gives it a vibrant color and seals your work in. do 3 layers of clear coat allowing time to dry for each coat. once the 3rd coat is fully dry, use wet 600 Grit sandpaper to lightly sand the board. This evens the Clearcoat. after all that you'r officially done with your board, it's ready to surf. I've done boards for friends right before they go out, and i've done full board pieces. either way it's a great way to spice up your board.
I'll Post pics of some work when i can find my Camera plug-in cable for my computer
muchas gracias senor. im guessing you should use the water based ones correct?
Last edited by johnnyav13; Jun 8, 2010 at 10:04 PM.
Reason: messed up