What is better Fiberglass or Epoxy and why? I never riden anEpoxy board before.
Results 1 to 10 of 30
Thread: Epoxy or Fiberglass
Epoxy or Fiberglass
Aug 7, 2010, 09:49 PM #2Member
- Join Date
- Oct 2009
- Monmouth County
depends on your style of surf. epoxy boards have a very stiff feeling. very durable but idk if its me it just doesnt feel right sometimes
Aug 7, 2010, 10:21 PM #3
if you're referring to a tuflite style (as i suspect you are), then i say a traditionally constructed polyurethane foam & fiberglass board is the better call. partly out of ethics (see the thread about pop-outs), but mostly b/c i hate the way those pieces of crap ride...any kind of cross chop on the wave & you get this weird chatter going which, if the chop is bad enough, can turn into a kind of surfy "death wobble". not fun.
the 2nd type of epoxy, the eps foam blank, is hand-shaped in the same manner as a poly blank. the only difference is that the blank is lighter & the epoxy resin is stronger. some say that these boards have more float, but i find that to be largely negligable, so you'll want to keep your usual dims. these are certainly stronger, but like all epoxies, a small pain to repair.
Aug 8, 2010, 12:54 AM #5
Here's my biased opinion...
My experience has been a well designed, hand shaped, hand laid-up, EPS/epoxy board will be as high performance as the polyurethane/polyester board, but be slightly lighter and last at least twice as long. Tufflite and other "popouts" might be even more durable, and last even longer, but the performance is compromised significantly.
Early generations of EPS/epoxy boards had issues. Nobody really knew what design adjustments had to be made to compensate for the difference in the physical properties of the materials. Once that happened, things evolved pretty rapidly, and boards improved greatly. Then, along came surfboard specific foams and epoxy resins, and the whole game changed again. Close tolerance, pressure molded blanks, custom rockers and stringers, UV stable resins with very specific flex and strength parameters, and improved workability of those resins lead to a huge leap in EPS/epoxy surfboard performance and durability. Suddenly, we had the best of both worlds... a performance surfboard that was more ding resistant and more snap resistant, that could be custom shaped, and glassed to the user's specifications.
Do they feel EXACTLY like PU/PE? No. Do they look as pretty when tinted, glossed and polished? No. Are they more expensive? Yes. Do you have to be careful about heat extremes? Yes. Are they harder to build and repair? Somewhat.
Do they turn, tuberide, punt, catch waves, and all that other good stuff? Oh... you bet they do.
Thanks for all the input. The reason I brought up the question was that I am looking to purchase a Retro Fish quad and had a choice between fiberglass and epoxy. I never riden an Epoxy before and from the looks of them they looked cheap, plastic like and stiff. Once again thanks for the detailed info. Now I can focus on get some nice waves tomorrow... Bring it on Colin.
i have a hand shaped epoxy it is my favorite board, i ride it better than any other of my boards, but i do agree that the tuflite stuff feels wierd
Aug 8, 2010, 03:25 AM #8
Aug 8, 2010, 03:24 AM #9
It's a 6'4" Al Merrick Flyer Tuf-Lite...regardless of the fact, I have got some pretty good rides on it....the only time I really notice it wobbling out of control on me is when I try to go straight down the face of a wave and bottom turn, as long as I pop into a wave on an angle it seems to be fine and I will say the thing flies
anybody want to buy a 6'4" Al Merrick Tuf-Lite Flyer for $500...It's practically brand new, no dings, DaKine traction pad....I really wish I had have bought a PU