Here are some of the listed ads I was looking at.
1. Quality 5'8 Epoxy Retrofish Surfboard Quad Fin.
2. ALL OUR EPOXY BOARDS ARE HAND SHAPED AND MADE WITH THE FINEST GRADE MATERIALS. WE USE 2 LAYERS OF 6 OZ. CLOTH AND HIGH QUALITY EPOXY RESIN THROUGHOUT THE PROCESS.
3.BRAND NEW, EPOXY TECHNOLOGY, FCS-COMPATIBLE REMOVEABLE FIN SYSTEM, CUSTOM HAND MADE
4. High Density Australian Foam, Hexcel Glassing, 6 oz on the bottom 6 oz + 6 oz on the top
5.Hand shaped fiberglass, 2 LAYER 6 OZ. CLOTH, DOUBLE BARREL TO V CONCAVE IN THE TAIL.
Results 11 to 20 of 30
Thread: Epoxy or Fiberglass
Aug 8, 2010, 02:23 PM #12
Sounds like traditional construction, not a "tufflite" type composite sandwich construction.
What is the brand? Can you see the stringer?
It's a 6'4" Al Merrick Flyer Tuf-Lite...regardless of the fact, I have got some pretty good rides on it....the only time I really notice it wobbling out of control on me is when I try to go straight down the face of a wave and bottom turn, as long as I pop into a wave on an angle it seems to be fine and I will say the thing flies
anybody want to buy a 6'4" Al Merrick Tuf-Lite Flyer for $500...It's practically brand new, no dings, DaKine traction pad....I really wish I had have bought a PU
Aug 8, 2010, 04:13 PM #14Senior Member
- Join Date
- Jun 2009
nothing like a poly, ive tried it all.. in the gutless small stuff i would consider an eps blank. sometimes theyre to light, also go with a shaper thats been working with it for a while.. im loving resinx and a poly blank
Aug 8, 2010, 08:21 PM #15
I've owned one pop out (Southpoint) and one hand-layed epoxy (Vernor). What bothered me about both is their weight. They're too light for anything but the cleanest swell (for my taste). I've found the same in a PU Fishcuit, too, however. The lightweight boards...PU or epoxy...ride the same to me: Corky.
Personally, I feel the inertia of a heavier PU foam board with 6oz/6oz & 6oz glass maintains the speed if I pick the wrong line through the wave, which I do often (What can I say...Kelly Slater, I'm not). Heavier boards also slice through textured or choppy waves better, in my opinion. My knees get rocked when I use epoxy or a lightweight PU board.
Like exilenj, I would consider trying an another epoxy board specifically for clean 1-2 ft surf, but I'd only get a longboard knowing that I would only use it in cases of summer desperation.....like the past month and a half.
If you're young, light and looking to punt some airs in waist-high (and above) waves, consider an epoxy. If you're looking for a board that you will want to use in almost every wave condition, however, go PU. Just my 2 cents...
Last edited by Ray F.; Aug 8, 2010 at 08:37 PM.
Aug 8, 2010, 09:05 PM #16
- Join Date
- Jan 2009
- Hilton Head Island - OB, SD
I have said this before, but I have not had any luck with “high performance” EPS epoxies. Their weight distro is much different than traditional boards. The loose tons of Torque in big surf while you are changing direction…. They slide out on really drastic bottom turns that take a tight angle…. They feel way to light to power surf, so really the high performance epoxies that I have ridden were good for one thing: Airs… I will admit that it added a few inches to the most simple of airs. But to me, it was really hard to spin the board in the air at all. You can aim a straight frontside air down the line and land it, but if you try and dig your tail in and get some spin action before your fins release, it never worked. It would pop out sideways and I would hit strange angles…
The only epoxy board of any kind that I stuck with and was SUPER fun was an EPS epoxy, handshaped shortboard/fish hybrid. It had a nice big swallow on it, about 5’9x20.5 or so… So it was short, fat, fast as hell… I lost some performance in my quick turns etc, but that is because of the fishy shape, not really the materials. But normal cutbacks, floaters, airs, everything. This little board was perfect because it RIPPED in good surf, but the light weight really didn’t matter in choppy, windy, smaller surf, because it had enough over all foam volume that it always floats, gets great speed etc….
So, I think epoxy has it’s place nowadays, but it may not be ready for maintstream high performance surfing…
For an average surf, who isn’t out everyday looking for crazy performance, then an epoxy board is perfect. It is durable, light, easy to transport. This is especially true if you are riding funshapes, eggs or smaller long boards… Because the minor performance details are not as apparent.
But if you are a veteran shortboarder, who is comfortable with traditional PU boards with thruster setup etc, then be careful with epoxy… I think the key to epoxy may also be patience… Where the boards ride just differently enough to make things frustrating… When I first rode my epoxy fish hybrid thing, it took me days to really dial in the feeling of the materials… And it took me riding the board every day in small surf for like 3 weeks before I finally had a breakthrough and figured out how the thing worked. You just have to take sharper tighter angles and then the thing was going airborn… But it took me everyday for weeks before I made the connections on how to get the best performance out of it…. But if you cant surf everyday, or have lack of swell all the time, these epoxy boards may drive you nuts. You really need to spend a lot of quality time on one to get it dialed in. And once a week or a few times a month wont do the trick….
But after that long pointless story, I guess my point is that I have no more epoxies in my quiver. I stopped getting them shaped because I was sick of dedicating so much time and study on a board when I should be doing much more surfing than thinking. So, im back to riding 7 different boards all with basically the exact same dimensions, each with an inch difference in length from 5’10-6’2. So, maybe im boring, but Epoxy has just never panned out for me. They can be fun, but novelty fun… not slashing/ripping fun.
Aug 9, 2010, 11:59 AM #17
Well said, Zach... There's absolutely a learning curve involved, particularly if you're an experience, above average shortboarder who's got PU/PE dialed in. And that's a serious consideration when you're dropping a lot of money for a new board, and living in a place where there's more unsurfable days than surfable. Like going from a thruster to a quad or twin, there's an adjustment period. Some people can make that adjustment after a few waves, some a few sessions, and some just can't ,or can, but don't like the feel, period. EPS/Epoxy does not feel like PU/PE... it's not supposed to and it never will.
I surfed nothing but PU/PE for almost 30 years, and today, all my shortboards are hand shaped and glassed EPS/Epoxy. For me, they allow me to elevate my performance, not limit it. But I've never been, and never will be, a one-board surfer. I like mixing it up and ride all kinds of shapes and sizes (except mid-lengths... they don't do anything well, IMO).
But I will confess...my log, and my big wave board, are both PU for the exact reason you stated... I like the added weight and momentum.
Aug 9, 2010, 03:52 PM #18
What you didn't say is whether or not you have experimented with different stringers and multiple stringers in your EPS/epoxy boards as a way of balancing the weight distribution and flex/rigidity characteristics?
Aug 9, 2010, 04:57 PM #19Senior Member
- Join Date
- Aug 2008
- Berlin MD
Last edited by scotty; Aug 9, 2010 at 05:04 PM.
Aug 10, 2010, 02:43 AM #20
i would stay well away from anything these folks are selling. why try to buy a board on the internet anyway? cruise down to your local surf shop & talk to someone who knows about surfboards. the ding repair guy is always a safe bet.