XTR Surfboards

Eat a bag of D's barry! Shouldn't you be busy perusing scat porn?

 

Oooo, another intelligent life form!!
You get tweaked way too easy. That means you are boring.
NEXT!

 

fixed it for ya

 

thing is eps and xps style boards are more sensitive to heat so if you dont take care of them they wont age well.Resin can get soft and start to move in hot sun especially if it has darker colors,big letters and large logos.
eps foam was used in the 40s by dave sweet and bob simmons for surfboards

 

Yes to the former, no to the latter. I've melted out the bottom of board just laying on the hot sand. But I mean HOT sand... like, too hot to walk on in bare feet. I've also opened up my rooftop cargo box to find my board turned into a balloon... the skin completely blown off the blank. And yes, dark colors are at higher risk.

Everyone should know the rules... don't leave your EPS board in a hot car, and lighter foams (less than 2#) and billet foam (as opposed to pressure molded) are more susceptible.

 

I have a mo' betta rule.....don't buy EPS board!!
Buy polyurethane, minimizes any heat concerns, cold concerns, and they are mo' betta boards anyhow.
BBRRRRRPPPPP!!!!!!!

 

Thats the sand every day here in the Summer / Fall. Sometimes I burn the bottoms of my feet just going to and from the water.

 

He’s just talking shit, he wants a Coil but hasn’t pulled the trigger.

O Barry

 

Then try one of these, Mr. Progressive!! Chicks are included!!
https://www.islesurfandsup.com/stan...MIrbbxpeDT2wIVArfICh0c8QDLEAEYASAAEgJUSPD_BwE

 

not a fan of epoxy 'corkiness' so i stick with poly but and local shaper with good skill can replicate a big boy shape.

 

Just go thinner (reduce volume), and take some excess flex out with a thicker lamination (substitute one or more 4oz layers with 6oz). Feels almost identical to PU

 

Hope you get it in Panama
You should have it wired by the FALL

 

i think I saw that board in an old Batman episode