Board Racks

Discussion in 'Northeast' started by spikeb122, Jun 23, 2011.

Tags:
  1. spikeb122

    spikeb122 Well-Known Member

    62
    Jan 13, 2009
    looking to put up a wall rack for my boards to get them out of the way. i'm looking for a cheep sturdy rack, has anybody used nice rack brand (the expandable ones), and DelSol brand? I've seen the other ones but i'm not trying to spend a hundred bucks a board to hang it up
     
  2. EHBS

    EHBS Active Member

    34
    May 27, 2010

  3. shredfactory

    shredfactory Member

    5
    May 23, 2011
    2x4 drill and a dowel works great pipe insulation of you wanna get fancy
     
  4. MATT JOHNSON

    MATT JOHNSON Well-Known Member

    Oct 11, 2009
    u can use some PVC pipe and assorted T's and elbows and mount it to the wall. You can also use thread iron pipe if you wanna spend a little coin to buld it . But a 2x4 with some Dowels will work fine just pre drill into the 2x4 of the size the dowel is about half way in . this will make it sturdy and make it sure that it wont fall apart.

    Try looking a TRaxx they make awsome surf racks
     
  5. SurferGuy

    SurferGuy Member

    13
    Aug 25, 2010
    I have installed gatekeeper and rocky racks to hold my boards. I know you said you didn't want to spend much so before that I was able to find an L bracket at Home Depot that was about 2 inches in diameter on the bottom half of the L. I covered that in pipe insulation and then used a couple bungee cords to hold the boards on, it held about 2 or 3 boards. I must admit that the gatekeeper racks are worth the money though.
     
  6. agnsurfer

    agnsurfer Member

    23
    Jul 8, 2010
    I made one last summer that is able to fit 4 boards, 2 shelves basically, attached by rope, with 2 boards on top of each other on each shelf. I'll post a picture in a few minutes, just need to take the picture first.

    Edit::
    Here's the pic:
    http://www.swellinfo.com/gallery/files/1/5/6/8/8/img_3559.jpg

    If anyone has any questions just private message me and I'll be more than happy to answer them.
     
    Last edited: Jun 27, 2011
  7. spikeb122

    spikeb122 Well-Known Member

    62
    Jan 13, 2009
    i'm not really looking for some n***** rigged piece of ****, i can build something quick and cheep but i don't want it to look like **** so i was talking about buying something
     
  8. agnsurfer

    agnsurfer Member

    23
    Jul 8, 2010
    Oh well, if you do a good job and take your time building a rack like mine, not saying that I put time into it because I didn't, you could probably make it look really good.
     
  9. Greenlight

    Greenlight Well-Known Member

    286
    Nov 13, 2008