Separate names with a comma.
www.cleansnipe.com can look at a bunch of the deal sites at once
hopefully they fixed the issues because we have the original flip and have broken 2 or 3 of them. the water housing filled up with water while...
ive seen a solid eps board, they seems to surf pretty well [img]
[IMG]
jet blue charged us $50 per way, and didn't check the amount of boards in the bags.
you want flex? shape it out of bamboo [IMG] one of my oak fins before final sanding
[IMG] almost 30" in northern nj
didn't make that and that was pretty much a close out http://vimeo.com/9010029
[IMG] some sets came through. this was not the biggest set that came in. the waves we saw as we were leaving were hugeeeeeeee
oh, well i plan on making the fins out of wood and glassing over the surface, i assumed the wood would be more brittle than pure cloth
Yeah my only issue I'm predicting is the strength of the tabs for the fcs slots. I've considered drilling holes through the tab and into the fin...
Thanks I really like how they came out, and in the spring I'm going to experiment with making some to fit the fcs system the overall cost was...
hard to judge time since i had to try to fit in time around work. you could do it in a week if you have the time, easily. thanks, i guess since...
[IMG] first layer of glass over the fins [IMG] cut off the excess with a razorblade. leave some extra, 1/4"? [IMG] found two pieces of...
[IMG] cut out the inlay with a razor blade along the line of the other color i think i added two more sheets of cloth over the deck, and at...
[IMG] put magazine pages over the deck to protect it from resin dripping. would look cool just to glass over it [IMG] had a scale to measure...
[IMG] starting to take shape. don't let the excitement overtake you, and rush [IMG] another huge mistake, i already had the rocker i wanted on...
[IMG] took one pallet from the backyard [IMG] couple screws and a skill saw later, shaping stand [IMG] template of the lost board i...
a few people thought it would be a good idea to post the home depot process of making a board, so here is mine [IMG] bought some sheets of eps...
layered up a bunch of the insulation foam from home depot with glue and tape and weighed it down over an existing surfboard to match the rocker...
