Separate names with a comma.
Emass possibly you should consider ingestion of your keyboard.
Nah, googling the etymology of the term shows otherwise.
I just found this conversation: http://www.surfing-waves.com/forum/viewtopic.php?t=13131 Rodrigo: "ummm ... i know this is a really kooky...
Lazy? Lol I work about 70 plus hours a week, and as for incompetent I disagree, there has been zero information out there on the slight...
Again: Cheers Surfdog. It seems that there is a difference in the box depth between Australian and US fin boxes. dingpatch fins over on the Jam...
Whatever. There's no info on any difference in box depth out there, at least not until today... and as you can see I am addressing the issue at...
My sense of humour is drier than yours it seems, and eschews potty jokes.
Cheers Surfdog. It seems that there is a difference in the box depth between Australian and US fin boxes. dingpatch fins over on the Jam board...
The only one who gave anything during this saga was myself. As for slander, it seems that you have your blinkers on again. By the way I...
...............
You don't have time for sanding a bit off the bottom of the base but do have time to post abuse. The fitting procedure will take a couple of...
I already told you that you need to sand a small amount off the base and around the radiused section of the base at the pin end. I make these...
You must be joking, or blind...
Of course, that's how you and a few others wanted it to end, that much is obvious... and it's pretty easy for you to achieve that aim via the sort...
I repeat that the problem which you are having is certainly not the pin diameter. it's that a small amopunt of material needs to be removed from...
The pins are a standard product sold by Pacific Surf Industries. and have fitted every box they've been presented to so far... except, at least...
If he was a PAYING customer we'd bend over backwards and freight the fin back here to fix the miniscule sanding job.
Nah just straight talking is all. Go elsewhere for mealy mouthed customer (?) service.
Who gives a sh^t. If a man can't spend 2 minutes taking a smidgin off the fin base after grabbing 5 free fins then I'm not interested.
Businessman? I'm Roy, end of. Go f*ck yourself.
