Separate names with a comma.
All five panels for the new 10-5 'Rampant' sanded ready for lamination:...
Quite right about counselling, I didn't realise that it is spelt with one 'l' in the USA. You are wrong about 'spelt' though, on two counts....
Nicely foiled, and plenty of thickness there, so she should handle plenty of angle of attack when turning
That'll do the trick... but good luck sanding it! I'd put loads of resin on it before sanding, because kevlar fuzzes like crazy if you hit the...
I have no idea why it would be a racial sur, I was thinking of the insect: [IMG] 'Counselling' is how the word is spelt by the way.
That's a pretty looking beast, like a bumblebee. By the way have you seen the new shark repellent wetsuits with the zebra stripes? The gang buster...
It looks like your trailing edge needs more foiling. Looking good though. Anyway regarding vents, the big stainless vents are typically a pound...
Looking good, be careful not to break it while foiling. Glassed it will be ultra strong as the shape is naturally very strong.
The tunnel for the 'Rampant has two layers of 3mm wood with a glass layer in between. because the glass layer is on the neutral axis it doesn't...
Foiling wise when using a single in front of the tunnel I use a laminar flow foil, with the thickest part of the chord back at about 45% aft, like...
You could do a big wooden one if it is glassed for strength. The Baron tunnel is made of paper and tinted resin, just cover your mould with...
Looking good, the rocker looks fine, and will suit a tunnel, or just about any fin setup.
Hi Charles yes I don't see why not we use linseed oil on paipos and it seals ok. Are you still planning to do a tunnel fin? If so were you...
What would be even more amazing is the ability to change my appearance to look like three different people, with three different workshops, and...
It is true that one should re coat before the resin is fully cured, so that chemical bonding occurs. The issue is whether or not to sand between...
Good show Charles. The 207 hardener gives a gold colour to the resin, it's pretty good stuff. I've been meaning to reply to you re. a tunnel fin,...
Phil Griffin.
Harrumph...
Well... I know a very good surfer from my home break by the name of P Griffin who always wears webbed gloves and gets an obvious paddling...
Hi Charles the board will lighten up quite a bit when the rails are shaped.
