Separate names with a comma.
Fun thread. Please don't forget Minutemen.-D. Boone, Watt & Hurley. Double Nickels on the Dime, greatest punk record(s) ever IMHO. "Glory of Man"...
Get it and ride it. Cool thing is even though it's probably stolen (like a lot of the junk on CL) there are 200 just like it and it will be hard...
Neoprene gets brittle and stiff on the rack, that's why retailers blow it out cheap to get rid of it. Solvents and petros evaporate out of it and...
Just make sure all wax is gone and the surface is sanded well, 220 grit works pretty good. If the paper gets clogged keep going w/ new paper until...
That is an excelllent collection ratred. But you are not a card carrying hoarder until your head bumps the ceiling. Looks like you only have a...
I understand that the Bert Fish Medical center treats more shark bites than anywhere on earth. The shark attack capital if I'm not mistaken, but...
Don't know about the stinger wing but if you get one I bet you will love it. But probably won't pull chicks very well. Looks like a one board...
Average surfer on a bonzer perspective coming, get ready. Had 2. A 6'2" and a 6'6" in '88 and 89'. Both Campbell Bros. Maybe they work better in...
She blinded me with science. And that link w/ Knox on the bonzer only confirms that those things are a waste of plastic foam and fiberglass....
No, a board more dense (heavier) of the same displacement does not float as well as a lighter, less dense board. A 12lb. hull will not sit as high...
Great 70's single fin riders: Terry Fitzgerald was my fave for the fast high trim and Shaun Tomson for his stinkbug front foot tube riding. Check...
Would be real cool to get a blank of some lighter wood. Any luck sourcing some balsa, paulownia, or some of that cactus wood that I seen Gary...
I feel flex when I bottom turn an old clapped out, mushy deck PU board. Feels like I tapped the brakes. No squirt or not as much squirt. It's...
Plan on a shaped blank that might net out 2" max thickness if you are lucky. That delaminated area is way down deep in the blank. You will see...
Enjoy! OBX may be my favorite place ever and I wished I could go with. So close yet so far away. Party on mi amigo. Damn work.....
You do know that by the time you strip any of the fiberglass off it will take a lot of foam with it. It will end up very thin depending on how...
Just be real careful getting them over 5'10" because if you end up popping up ahead of the fins (which you will because they will catch a softie...
You pull the tail and then they lose the effect. Start making them "performancey" by pointing the keels at the center of the nose putting curve...
On a Harley you are crazy. Those things are made for bar hopping and blvd. cruising. And the balance is way off on them anyway with their stupid...
Slidey fun. But if you wanna get barrelled you might want to get the keels in the board was made for. But you can get used to and rip on anything...
