Separate names with a comma.
Another trick you might wanna try is if let's say the gouge is in a position where the epoxy will (run) out of the gouge try putting a piece of...
[ATTACH][ATTACH][ATTACH][ATTACH] Ok so tape off the area that's damaged and clean it out remove any debris and loose stuff. Sand it clean. Get...
Yes absolutely. Pull out broken loose fragments / de laminating fiberglass from the damaged area then sand to clean it up. After its dressed like...
Just look for the guy on the crazy wooden stub that's probably me. I'll be dialing the board in so try not to attract a crowd to throw off my...
Actually epoxy will bond to polyester perfectly fine and epoxy bonds to epoxy well too so the resin type won't matter. What I'll do is post some...
Are you referig to the Maine blanket on my sofa ?my woman likes to make the home look all cozy I guess. It's not stolen I wouldn't want any filthy...
[ATTACH] Well boys I tried to test today but the surf was so terrible I decided to not curse myself by trudging through the hoards of miserable...
Calcium I have a shop in York Maine where I could fix it for you very cheaply or you can trust me on the west system stuff and have at it ! Or if...
Your pictures are a bit dark so I can't really tell how bad it really is but to me it doesn't look bad. If I were you I would definitely fix it...
Well fellas its been a good time on here with you and all of the antics.. The Gang Buster is complete and now you can all place bets as to how...
Well this tunnel in the board now is foiled outside only, I had made another that was foiled both sides but ended up scrapping it because I messed...
Well considering the lift created at the nose of the surfboard which will keep the annular wing at an angle that will create upward lift at the...
We've all seen guys on the Solid pancake thin alias with literally no volume and those things seem to take up plenty of wave energy. The gang...
