Separate names with a comma.
Cool, check this out about graphene, it;s supposed to be harder than diamond, so board bags will only be needed to protect your car and the rocks...
Laser sintered fins are available now ( well in the next week as drawings for the internal structure have to be completed. Cost is high, due to...
You'd be surprised at the force which my bigger fins generate, especially the BLEF foils which have high lift coefficients at high angles of...
We've had excellent results with the BLEF foils, the fins can be done with a conventional leading edge also. It's all easily customisable as you...
That's a singlefin with tab for a standard box, well be doing FCS tabs also, I have the specs somewhere...
Indeed his rant is typical of the problem which I mentioned, sane people like yourself Charles are needed to keep such errant characters in line...
If you've seen the video and yet type what you did above then you are seriously deluded, a habit which can be dangerous to one's well being....
I started using my method after having been a short boarder for 20 plus years and built single fins from7' to 7'10" for the first few years. I've...
W.A.V.E.S.E.T fins can certainly be printed, if I can get hold of one to copy the base and/or foil.
We've tested the weaker ABS version to destruction and the strength is fine, so the polycarbonate should be also. We are also getting laser...
Request declined and I'm not anti American, I just don't like the current government of the USA and their interference in other countries. This...
The first prototype 3d printed warp Drive fins have been created in ABS and one was tested to destruction, the results showed adequate strength....
Is that the best you can come up with? I'll play it gain to celebrate: https://www.youtube.com/watch?v=NGtVI0ifyFs
Hi Charles your plans will be on the way soon, it's been a mad house here with work etc. I'm stoked with the board it carves nicely and takes a...
Hi Charles, I rode it to death. The current one is as good as new, here it is at the point, Manu Bay Raglan yesterday:...
1995 Balsa 7 feet by 18" by 1.5" shown here with Rich in Japan [IMG]
Thanks bub, and I suppose that you're right, guilty of forum addiction and wearing an astronaut suit on the ocean. My next board design is the...
Earlier the same day: http://www.roystuart.biz/2013/11/manu-bay-on-makaha.html https://www.youtube.com/watch?v=KB5s5azZO_Y
That's my shortboard. When I can't carry 25 pounds I'll let you know.
Try looking with your eyes rather than with your nose, the turning will improve immensely.
