Looking for a nine six or so with a decent amount of rocker

Discussion in 'Surfboards and Surfboard Design' started by Nosediving expert, Jan 7, 2015.

  1. Nosediving expert

    Nosediving expert Well-Known Member

    76
    Aug 21, 2014
    Fiberglass boards in this range seem to have flat rockers. Only other option ive found is nsp, nice rocker but have all the faults of epoxy. Looked all over and nothing reasonably priced. Last 9/6 i had was shaped by david hamilton, best board ever.
     
  2. yankee

    yankee Well-Known Member

    Sep 26, 2008
    If you, or anyone, want to purchase a 9'6 Robert August WIR, I've got one in mint condition & one brand new never been ridden - - both are Clark foam. PM me.
     

  3. LBCrew

    LBCrew Well-Known Member

    Aug 12, 2009
    Sounds like you're looking for a hplb. See what you can find in your local shop or talk to a shaper about a banana rockered longboard. Walden longboards have a few models with accelerated rocker, too.
     
    Last edited: Jan 7, 2015
  4. garbanzobean

    garbanzobean Well-Known Member

    257
    Sep 15, 2010
    You mean polyester resin/urethane foam boards (clark foam style) when you say "fiberglass", right? Most epoxy resin sticks have fiberglass also. What exactly are all the faults of epoxy? There are a lot of ways to build an "epoxy" surfboard so you might have to elaborate. If you factor in all of the combinations of materials one can use with epoxy resins the combos are infinite. So be specific when describing your hated "epoxy" boards- like who made it, when and what material combination. And if you think you want a more rockered up board you can be specific on that also. Put the board with the fin out bottom down on a flat floor and measure the tips and come up with your desired numbers. Those flat rockered logs you see may not be as flat as you think. Maybe all the rocker is in the back end. Rocker on a log is deceiving and too much in the front may make it hard to get in early on soft waves which is why you might want to ride a log in the first place. Do the math, use science and reasoning to make decisions, learn what the differences are, do the research, bone up.
     
  5. garbanzobean

    garbanzobean Well-Known Member

    257
    Sep 15, 2010
    Check this nosediver. I know for a fact that more rocker will not keep you from pearling. It will only slow you down because more rocker makes boards paddle shorter. Remember to catch the wave and don't let it catch you. I always tell newbies that the wave is a bus moving down the street. If you run along side and jump in you can ride on it. Stand still in front of it and it will run you down. That nosedive is the wave picking up the tail and pointing the nose down in because it is running you down. Move up on the board and dig in- short, quick and high cadence paddling get you moving faster than long and deep strokes. Get the flat rockered log for soft and small days and a shorter fun 7' to 8' cue for good days. And remember to paddle down the face and aim it up into trim if you are taking off late. And call Dave Hambone, bet he would love to build you a custom...Hope this helps..
     
  6. RootDown

    RootDown Member

    17
    Sep 2, 2014
    you are leaving out a lot of information. are you talking entry rocker or tail rocker? There are alot of "performance" longboards out there, if thats is what you are looking for. But, why are you looking for a heavily rockered LB? what kind of conditions are you surfing in? I used to have a banana rockered brazillian thinned out longboard, and it was very versatile until it snapped in half. but you had to surf it like a shortboard and one step forward would immediately step on the brakes. now I prefer a lower entry rocker on my "modern" longboard shapes because its so much easier to paddle and catch waves, and you can still noseride. I rarely if ever pear on it if I angle my takeoffs.
     
  7. BassMon

    BassMon Well-Known Member

    436
    May 8, 2013
    The last 2 posts are pretty good advice. What's your reason for wanting this board? If nose diving is your problem then follow garbonzos advice. I have a 9'0 lb, not a huge amount of rocker but not flat either. It's a pretty simple all-rounder shape. Takes steep drops just fine, if it pearls it's because I did something wrong. Most local shops should have lbs with a similar shape.
     
  8. worsey

    worsey Well-Known Member

    Oct 13, 2013
    not glam but a SOOPER lb is a surf tech softop 9/6.
     
  9. CBSCREWBY

    CBSCREWBY Well-Known Member

    Feb 21, 2012
    Baddy, Looking at board for wife so checked out that board.... 700 bucks!!!??? That's pretty glamorous for a soft top!

    P.S. I learned something about my surfing and my Ricky Carroll HPLB from this tread...
     
  10. worsey

    worsey Well-Known Member

    Oct 13, 2013
    wow!
    that part i didn't know.
    i'm kinda dinosauric;
    bought mine in '00 for (?) for $380....

    can tell 'y a this - over 15 yrs and 101 surfers....no dings yet.:)
     
  11. ClemsonSurf

    ClemsonSurf Well-Known Member

    Dec 10, 2007
    It's the india..... Native American, not the arrow.
     
  12. heyzeus

    heyzeus Well-Known Member

    190
    Oct 7, 2014

    This. This x1000.
     
  13. Mitchell

    Mitchell Well-Known Member

    Jan 5, 2009
    All true. pearling is plenty easy on a longboard even with rocker of you arent paddling into the wave properly.
    I personally like riding longboards with accelerated rocker (nose and tail), as well as low volume and pinched rails. Paddling isnt an issue for me.

    They seem to make bottom turns faster, fit in the pocket without catching a rail (mine have the chined rails - maybe that is a help), and turn from a fixed stance easier.

    But if your looking for a longboard for soft 1-3 foot mushy waves, yeah, the accelerated rocker probably isnt necessary and detracts from the glide - both paddling and planing.
     
  14. Nosediving expert

    Nosediving expert Well-Known Member

    76
    Aug 21, 2014
    Thanks all. Im going to keep this short because si times me out and i lose what i wrote, any tips in this respect are appreciated. The nine six i had broke and i surfed it for years, possibly had gotten too used to it. I have a nine two with flat rocker and pearl more frequently. I just found that the flat rocker really wants to dive on me as opposed to the other board..
     
  15. Nosediving expert

    Nosediving expert Well-Known Member

    76
    Aug 21, 2014
    Im getting better on the nine two, just seems like an inch forward or backward makes the difference between eating it or making it. Ive yet to find the sweet spot.. I surf in jersey which doesnt always have predictable breaks. Thanks for the offer on the board and shaper advice but sorta broke now but things could change soon.
     
  16. KellySlater

    KellySlater Well-Known Member

    99
    Dec 10, 2014
    Hey nose diving expert, it seems like you dont have the energy to paddle hard for waves consistently, you need an energy boost, i suggest getting one of your sibligns to fart on your before you paddleout. I make sure before every heat that pam sharts on my face for 30 minutes straight.

    yes i am durnk

    and high
     
  17. Nosediving expert

    Nosediving expert Well-Known Member

    76
    Aug 21, 2014
    My epoxy reference had to do with an eight two nsp. It felt too light in the water, best way i can describe it. Like a clunky feeling. However a longer epoxy board might offset the weight issue. Plus ive never heard of anyone breaking an nsp in half.
     
  18. KellySlater

    KellySlater Well-Known Member

    99
    Dec 10, 2014
    noooooooooooo!!!! The surfboard doesnt farking matter!!!! You need somebody to shart on your face for a longm time
     
  19. yankee

    yankee Well-Known Member

    Sep 26, 2008
    Banned for life, I thought.