Lost Speed Demon XTR and Xanadu w/ carbon fiber

Discussion in 'Northeast' started by Blackfishrider, Apr 8, 2013.

  1. Blackfishrider

    Blackfishrider Member

    17
    Apr 8, 2013
    Shortboards ...Lost 6'2" and Xanadu 6'1" RI


    …Lost 6’2” x 18 ½ x 2 ¼”
    Speed Demon II Squashtail
    XTR 5.0 Epoxy
    Custom handshaped by Matt Biolos
    No Dings, some front foot indents, VERY lightweight due to extruded polystyrene construction when compared to a polyester board; excellent flex. When XTR boards are dinged, they do not absorb water. Speed Demons have a low entry rocker, making catching waves easier. This board would be ideal for someone in the 150 – 170 lb. range in chest to overhead surf. Tailpad and fins included. Art on bottom. $250

    Xanadu
    6’1” x 19 3/8” x 2 3/8”
    X-21 Model, custom handshaped swallowtail by Xanadu w/ custom airbrush
    One small repaired ding on end of one swallowtail wing, otherwise no dings. Some front foot indents. Carbon fiber reinforcement at rear foot on rails. Wide point on board is slightly south of center; medium entry rocker. Great for someone in the 150 - 180 lb. range in waist to overhead surf. This board has <20 hours in the water and is less than a year old. Tailpad and fins. $300

    Local pick up only - in Newport area.
     

    Attached Files:

  2. Cknollz

    Cknollz New Member

    1
    Apr 9, 2013
    Is the lost board still forsale bro?
     

  3. Blackfishrider

    Blackfishrider Member

    17
    Apr 8, 2013
    Yes, still avail! PM me if you want to check it out