please help me find ofishl original fins

Discussion in 'All Discussions' started by jcyr2, Aug 30, 2012.

  1. jcyr2

    jcyr2 Well-Known Member

    Aug 23, 2012
    I have a board with original fin boxes and I need 3 fins for it if anyone has some or any advice itd be appreciated
  2. Mitchell

    Mitchell Well-Known Member

    Jan 5, 2009

  3. jcyr2

    jcyr2 Well-Known Member

    Aug 23, 2012
    No the website is fake I've tried ordering from them three times no responses.
    Last edited: Aug 30, 2012
  4. Mikey

    Mikey Well-Known Member

    Oct 3, 2008
    the contacts section of the website has phone numbers and individual emails. did you try contacting them and letting them know that the ordering got flubbed up?
  5. jcyr2

    jcyr2 Well-Known Member

    Aug 23, 2012
    Yes multiple times email phone everything
  6. Mitchell

    Mitchell Well-Known Member

    Jan 5, 2009
  7. infinity8

    infinity8 Member

    Aug 20, 2009
    I had this issue with an old Infinity funshape with the "V Cluster" fin set up. The fins slid into the boxes with no screw, so eventually they slipped out in the water. I did eventually find an old set of Ofishls at the Beach House in Bay Head, NJ, but Eric there also gave me the idea of trimming Futures to fit. Either way works (if you can find Ofishls or retrofit) because either way you need to epoxy them in so they don't fall out!
  8. LateTakeOff

    LateTakeOff Member

    Oct 10, 2008
    It's been six months, but I had no trouble reaching OFishl at the following email address:

    [email protected]

    Mark appears to be a one-man band, building fins in his San Clemente machine shop. I've been there and bought a couple of fins from him; he's legit and seems like a nice guy. Try the email above (that's the letter L on the end - not the number 1). If you still don't get a response, let me know and I'll look up the number of a surf supply company across the street that will know if he's still in business.

    Or, you might also try the following phone number - 949-291-3797

    Good luck.
  9. jchafard

    jchafard Well-Known Member

    Aug 10, 2011
    Chaunceys surf shop in ocean city md has a few sets. Stop in!
  10. Greenlight

    Greenlight Well-Known Member

    Nov 13, 2008
    We can retrofit FCS Fusions, Futures or ProBox into your board if you have no luck finding fins.

    I had Ofishls in one board. I must have landed on a fin in a closeout section and it popped out never to be seen again. End of that session. Not a big fan of the Z-clip system they have. Grub screws are the best. I've even seen the LokBox steel plate bend on a bottom turn and the fin falls out.

    Just a heads up.

    Shape Your Surfing Experience

    COCONUTPEET New Member

    Dec 1, 2013
    Hi JCYR2,

    Mark Stavron is now working with Coconut Peet's Surfboard Repair & Trading Co. with regards to World wide distribution of all OFISHL Products. Please Visit either OFISHL fin website or Go directly to and they will fill your order immediately. OFISHL is back in business!
  12. jballen2

    jballen2 Well-Known Member

    Sep 5, 2010
    Just found a set at my parents house over the holiday weekend. Where are you located? I'm in NC