close ad [x]

Results 1 to 10 of 148

Threaded View

  1. #1

    Building the 'Hotkurl' 10'5"

    Here are the three internal panels for the 10'5" Hotkurl. Three layers are used rather than the usual two, so that they can be made thinner, this allows them to be bent more easily to the required rocker and the bottom concave.The central panel has frames and blocking running athwartships. Since the central panel is on the neutral axis, fore and aft orientation is not necessary for strength.
    Last edited by Roy Stuart; Feb 25, 2013 at 04:35 AM. Reason: Because because because because, because of the wonderful things I does...